Carbon-Ti X-Plug.

SHIPPING POLICY:

  • Shipments worth over $200 require a signature on delivery.
  • Orders of multiple items will always be combined into as few packages as possible.

RETURN POLICY:

  • Unused items in their original packaging may be returned within 30 days of delivery for a full refund. We pay the return shipping. Original shipped costs are not refunded unless we shipped the wrong item, or the item arrived late, damaged, defective, or not as described.
  • An item returned used, or with marks from an attempted installation, may get a partial refund.

Specifications

Size
Standard, for a 1 1/8 inch steerer
Steerer fit
  • Carbon or aluminum steerers
  • Inner diameter 21.2 to 25 mm
Material
7075-T6 aluminum, CNC machined
Replaces
A star nut, for setting headset preload
Made in
Italy

Warranty

Hammer & Howl is an authorized dealer of Carbon-Ti products. This product is covered by the manufacturer's 2-year warranty.

What's included

  • One Carbon-Ti X-Plug headset expander in the standard size

Not included: A top cap or bolt. The X-Plug sets your preload and holds the top-cap bolt, but the cap and bolt are separate.

These are the matching Carbon-Ti top caps, and each comes with its own bolt:

  • The Carbon-Ti X-Cap Carbon Matte Stem Cap or the Carbon-Ti X-Cap Carbon Gloss Stem Cap
  • The Carbon-Ti X-Cap Titanium

Will it fit your bike?

Compatible with

  • Threadless headsets with a 1 1/8 inch steerer that has an inner diameter of 21.2 to 25 mm
  • Carbon or aluminum steerers

Not compatible with

  • Threaded headsets, which use a locknut, not a top cap and expander
  • Steerers with an inner diameter outside 21.2 to 25 mm (measure to be sure)

Confirm before ordering

Check your steerer size (1 1/8 inch or 1 1/4 inch) and, ideally, measure the inner diameter. If you are not sure, confirm with your bike mechanic or contact Hammer & Howl before ordering.

A headset expander fits by the inside diameter of your steerer. The standard X-Plug suits a 1 1/8 inch steerer with an inner diameter of 21.2 to 25 mm. The Carbon-Ti X-Plug OS suits a 1 1/4 inch steerer with an inner diameter of 24 to 28 mm. It grips the inside of the steerer and holds the top-cap bolt, so it works in place of a star nut on carbon or aluminum steerers. Measure your steerer's inner diameter if you are not sure, since a carbon steerer's wall thickness varies.