Add a Scottish landmark to your favourite jacket or bag with this 100mm embroidered Parliament patch. The central scene features the Parliament building, Scottish Saltire and European Union flags, green trees and a reflecting pool. White SCOTTISH PARLIAMENT lettering and purple thistles frame the scene on a blue surround with a black outer border.

• Size: 100mm diameter (10cm).

• Iron-on backing — can also be sewn on.

• Ideal for jackets, bags, backpacks and craft projects.

• A Scottish souvenir or gift for architecture and landmark enthusiasts.

• Embroidered in-house in the UK.

• Supplied individually: one patch.

PLEASE NOTE – MADE TO ORDER

These patches are embroidered to order, rather than being mass-produced stock. Please allow up to 3 working days for us to manufacture your patch before dispatch.

Iron-On Instructions

1. Make sure the garment is clean, dry and suitable for ironing.
2. Place the patch in the required position with the embroidered side facing upwards.
3. Cover the patch with a thin cotton cloth or pressing cloth.
4. Set your iron to a medium/high heat setting with NO STEAM.
5. Press firmly over the patch for approximately 20–30 seconds. Do not move the iron backwards and forwards.
6. If possible, turn the garment inside out and press the reverse side of the patch for a further 20–30 seconds.
7. Allow the patch to cool completely before checking the bond.
8. Repeat briefly if necessary.

For items that will be washed frequently, or for extra security, we recommend adding a few stitches around the edge of the patch after ironing.

Important: Some synthetic, waterproof, coated or heat-sensitive fabrics may not be suitable for ironing. Always check the garment manufacturer's care instructions first. If in doubt, sew the patch on instead.