All our Clock rope kits come with:Glass sealDoor ropesSilicone based glueAnd end sealing tape for the ropes.If you have any questions about fitting, then please check out our rope fitting video:https://youtu.be/8QnTI-81lx8
It is important to bear in mind the following:
The doors should be cleaned of all old glue and ropes before fitting. They also need to be free of any oil based products and dry.
Clock Stove doors are generally easily removed, and this process is best done on a flat surface. We do supply silicone based glue so ropes can be glued without removing the door (as it doesn’t dribble), but this is not easy, so it is always easiest to take the door off, if possible.
Follow the instructions in the YouTube video for the best results.
New ropes are very spongy and will likely make it harder to close the door. This is normal, the ropes are the correct size and will settle in. Clock stoves will tend enable you to loosen the catch and slowly tighten as the ropes age, or the door is magnetic and will always pull the door seal tight. This coupled with our high quality ropes, will ensure a good seal can be maintained for years to come.
If you have any concerns or questions then please message us, or contact us on the tortoise.net