* Desktop model (Desktop placement)

* Cabinet-mounted model (For cabinet installation)

The HamGeek AMP-1000W is a fully automatic wideband power amplifier featuring up to 1.2kW peak output power. Covering a wide frequency range from 1.8MHz to 74MHz, it provides reliable power amplification for shortwave and VHF applications.

Powered by a built-in Linux operating system and compatible with Hamlib, the amplifier supports automatic band switching for most commercially available transceivers through the CAT control protocol. It integrates multiple protection systems, including fault detection, VSWR protection, and over-current protection, while supporting both input and output VSWR monitoring for enhanced operational safety.

Equipped with a 10.1-inch high-definition touchscreen, the HamGeek AMP-1000W provides a clear display of operating parameters and intuitive on-device control. The built-in high-power antenna tuner supports automatic impedance matching with a VSWR range of up to 3:1. Four antenna output ports are available, allowing users to configure automatic frequency-based port switching or select ports manually according to their needs.

Additional built-in features include a 100W 50Ω dummy load and a 1-4dB adjustable attenuator for flexible signal management. The amplifier also supports remote operation via network connection, providing convenient control and monitoring for advanced radio applications.

* For Ailunce HS2/HS3, Alinco DX-77, BG2FX FX4/C/CR/L, DL2MAN (tr)uSDX, Drake R-8A, Drake R-8B, DX Lab Suite Commander, Elecraft K2, Elecraft K3/KX3, Elecraft XG3, FlexRadio 6xxx, FlexRadio SmartSDR, FlexRadio SmartSDR Slice A Ser, FlexRadio SmartSDR Slice A TCP, FlexRadio SmartSDR Slice B Ser, FlexRadio SmartSDR Slice B TCP, FlexRadio SmartSDR Slice C Ser, FlexRadio SmartSDR Slice C TCP, and FlexRadio SmartSDR Slice D Ser

* For FlexRadio SmartSDR Slice D TCP, FlexRadio SmartSDR Slice E Ser, FlexRadio SmartSDR Slice E TCP, FlexRadio SmartSDR Slice F Ser, FlexRadio SmartSDR Slice F TCP, FlexRadio SmartSDR Slice G Ser, FlexRadio SmartSDR Slice G TCP, FlexRadio SmartSDR Slice H Ser, FlexRadio SmartSDR Slice H TCP, FlexRadio/Apache PowerSDR, FLRig, Guohe Q900/PMR-171/TBR-119, Ham Radio Deluxe, Hamlib NET rigctl, Hilberling PT-8000A, Icom IC ID-1, Icom IC-1275, Icom IC-271, Icom IC-275, and Icom IC-471

* For Icom IC-475, Icom IC-7000, Icom IC-703, Icom IC-705, Icom IC-706, Icom IC-706MkII, Icom IC-706MkIIG, Icom IC-707, Icom IC-7100, Icom IC-718, Icom IC-7200, Icom IC-725, Icom IC-726, Icom IC-728, Icom IC-7300, Icom IC-735, Icom IC-736, Icom IC-737, Icom IC-738, and Icom IC-7410

* For Icom IC-746, Icom IC-746PRO, Icom IC-751, Icom IC-756, Icom IC-756PRO, Icom IC-756PROII, Icom IC-756PROIII, Icom IC-7600, Icom IC-761, Icom IC-7610, Icom IC-765, Icom IC-7700, Icom IC-775, Icom IC-7760, Icom IC-78, Icom IC-7800, Icom IC-781, Icom IC-785x, Icom IC-820H, and Icom IC-821H

* For Icom IC-905, Icom IC-910, Icom IC-9100, Icom IC-92D, Icom IC-970, Icom IC-9700, Icom IC-M700PRO, Icom IC-M710, Icom IC-M802, Icom IC-PCR100, Icom IC-PCR1000, Icom IC-PCR1500, Icom IC-PCR2500, Icom IC-R10, Icom IC-R20, Icom IC-R7000, Icom IC-R71, Icom IC-R7100, Icom IC-R72, and Icom IC-R75

* For Icom IC-R9000, Icom IC-R9500, Icom IC-RX7, Icom ICR-8500, Icom ID-5100, JRC JST-245, JRC NRD-525, JRC NRD-535D, JRC NRD-545DSP, Kenwood TH-D72A, Kenwood TH-D7A, Kenwood TH-F6A, Kenwood TH-F7E, Kenwood TH-G71, Kenwood TM-D700, Kenwood TM-D710, Kenwood TM-V7, Kenwood TRC-80, Kenwood TS-140S, and Kenwood TS-2000

* For Kenwood TS-440, Kenwood TS-450S, Kenwood TS-480, Kenwood TS-50S, Kenwood TS-570D, Kenwood TS-570S, Kenwood TS-590S, Kenwood TS-590SG, Kenwood TS-680S, Kenwood TS-690S, Kenwood TS-711, Kenwood TS-790, Kenwood TS-811, Kenwood TS-850, Kenwood TS-870S, Kenwood TS-890S, Kenwood TS-930, Kenwood TS-940S, Kenwood TS-950SDX, and Kenwood TS-990s

* For Lab599 TX-500, Malachite DSP, OpenHPSDR PiHPSDR, QRPLabs QCX/QDX/QMX, Racal RA3702, Racal RA6790/GM, Radioddity QR20, SDR Radio SDRConsole, SEA-235, TCI Client RX1, TCI Client RX2, Ten-Tec Delta II, Ten-Tec RX-320, Ten-Tec RX-331, Ten-Tec RX-340, Ten-Tec RX-350, Ten-Tec TT-516 Argonaut V, Ten-Tec TT-538 Jupiter, and Ten-Tec TT-550

* For Ten-Tec TT-563 Omni VI Plus, Ten-Tec TT-565 Orion, Ten-Tec TT-585 Paragon, Ten-Tec TT-588 Omni VII, Ten-Tec TT-599 Eagle, Thetis, Xiegu G106, Xiegu G90, Xiegu X108G, Xiegu X5105, Xiegu X6100, Xiegu X6200, Yaesu FRG-100, Yaesu FRG-8800, Yaesu FRG-9600, Yaesu FT-100, Yaesu FT-100D, Yaesu FT-100MP, Yaesu FT-2000, and Yaesu FT-450

* For Yaesu FT-450D, Yaesu FT-710, Yaesu FT-736R, Yaesu FT-747GX, Yaesu FT-757GX, Yaesu FT-767GX, Yaesu FT-817, Yaesu FT-840, Yaesu FT-847, Yaesu FT-857, Yaesu FT-890, Yaesu FT-891, Yaesu FT-897, Yaesu FT-900, Yaesu FT-920, Yaesu FT-950, Yaesu FT-980, Yaesu FT-990, Yaesu FT-991, and Yaesu FT-DX10

* For Yaesu FT-DX101, Yaesu FT-DX1200, Yaesu FT-DX3000, Yaesu FT-DX5000, Yaesu FTDX-9000, Yaesu FTX-1, Yaesu MARK-V Field FT-1000MP, Yaesu MARK-V FT-1000MP, and Yaesu VR-5000

* 1 x HamGeek HF Power Amplifier

* Package Dimensions: 580mm x 510mm x 260mm

* Package weight: 23kg

Payment Terms

1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.

Shipping Terms

1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.

Return Terms

If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.

Custom Duties & Taxes

1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.

Feedback

1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.