Description:

Type: Fuel filter

Fit: 2011-2016 F-250, F-350, F-450, F-550 Super Duty 6.7L V8 Diesel Engines.

It is the standard fuel filter set for changing the filter in the HFCM and the one on top of the engine.

Be careful when removing the lower filter housing the first time.  Use both a box end wrench on the nut and a strap wrench on the body the first time. 

Then grease the O-ring and you will be ok after that.

The micron of this filter is 5. Every 20-22k miles,these need to be changed.

OE Part Number: 

FD4615, FD-4615, BC3Z-9N184-B, BC3Z9N184B

Package including:

4x Diesel Fuel

4x Oil Filter kit

(Two filters: one engine mounted filter and the frame mounted filter, and one gasket/o-ring for the frame mounted filter.

 

Compatible with these models:

(Compatibility is just for reference, please confirm your OE number Before Purchasing.)

For F-250 Super Duty Pickup - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2011-2017

For F-350 Super Duty Chassis - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2011-2017

For F-350 Super Duty Pickup - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2011-2017

For F-450 Super Duty Chassis - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2011-2017

For F-450 Super Duty Pickup - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2011-2017

For F-550 Super Duty Chassis - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2011-2016

For F-650 Base Straight Truck - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2016-2017

For F-650 Base Tractor Truck - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2016

For F-750 Base Straight Truck - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2016-2017

For F-750 Base Tractor Truck - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2016-2017

 

Fuel filter element:

Diesel Fuel Filters are highly efficient in filtering diesel fuel system contaminants to meet modern diesel’s engine demands for optimum fuel flow

which ensures the system is free of contaminants and water.Parts are manufactured from first-quality materials - chosen specifically for maximum

performance and application suitability.5 micron,98% water separation efficiency.Effectively filter impurities.

Up Engine filter:

Perfect connected plastic module will not be separated, excellent tightness. The fuel line and the buckle towards to the same direction.

Changing frame rail filter:

Remove sensor harness, and lossen filter housing with a 1 1/4" socket or 32mm or use a strap wrench. I highly recommend a strap wrench so you don't 

shear the plastic housing. Turn 3 TIMES (before opening the drain valve as to not drench yourself in fuel) then losses yellow drain valve and drain into 

suitable container. Remember to lube new o-ring and re install everything.

Changing engine filter:

Remove the fuel line keepers on both lines and by pushing down the yellow tabs and the keeper will go down out of the way, the other fuel line will come 

off by squeezing both white tabs inward then remove. Loosen the 7mm nut use a 7mm socket wrench to loosen the clamp around the filter, twist to the 

right until it stops then pull upwards, and install following the same steps in reverse order.

When all done with both filters:

You must cycle the key to the on position 6 times waiting approx 30 secs each time before trying to start truck.Turn ignition key to on, but do not start. 

Wait 30 seconds until the fuel pump times out, then turn the key back to off. Repeat 6 times. You will probably notice strange noises coming from the 

fuel system until it is mostly full.

Note:

--Please BE AWARE that the vehicle compatibility list on eBay may not be 100% accurate. Please Comfirm The Parts Number And Confirm This Item Fits 

Yours Before Purchasing.

--Above listed items are a main reference, for detailed model, please use the year/make/model check finder and check the replace part numbers to confirm 

the compatibility before purchasing.

--If you have any issues with our product, please contact us immediately and we will do our best to resolve your issue.