1. Product Model: LCR-ST2 2. Net Weight: ≈60.8 g 3. Battery Life: ≈3 hours 4. Charging Port: Type-C 5. Display: 1.47-inch HD Color Screen 6. Operating Temperature: 0°C–50°C (≤75% RH) 7. Dimensions: 311 × 70.7 × 20.3 mm 8. Storage Temperature: -20°C–60°C (≤75% RH)
Settings
1. System Language: Chinese, English 2. Measurement Speed: Fast, Slow 3. Startup Interface: Main Menu, LCR, Sweep, Sorting, Voltage 4. Screen Orientation: Auto, Right-Hand, Left-Right 5. Brightness Adjustment: 0–9 levels 6. Volume Adjustment: 0–9 levels 7. Auto Power-Off: Never / 5 min / 15 min / 30 min 8. Calibration: Short / 1Ω / 10Ω / 100Ω / 1kΩ / 10kΩ / 100kΩ / 1MΩ / 10MΩ / Open / 10V 9. About: View model and firmware version 10. Restore Factory Settings: Cancel, Confirm
【All-in-】LCR-ST2 LCR Meter for SMD & through-hole parts. Measures resistors, capacitors, inductors, diodes, continuity, voltage. Smart auto sorting identifies abnormal components. 100 Hz/120 Hz/1 kHz/10 kHz/100 kHz full-range scan for RF to large electrolytics 【Precise & Reliable Testing】Four RMS test levels (0.1 / 0.3 / 0.6 / 1.0 V) with series/parallel mode to reduce parasitic effects. Capacitors (1 pF–22 mF), resistors (10 mΩ–10 MΩ), inductors (1 μH–10 H), diodes (≤0.7 V), voltage (±30 V), and continuity 【Primary/Secondary Display】Auto measurement with primary parameters (R/C/L/Z) and secondary parameters (X/D/Q/θ) for thorough analysis and reliable testing. Ideal for electronics diagnostics and component verification 【Easy to Use & Read】Capacitor Tester with left/right-hand mode, 1.47" HD display, and adjustable brightness. Built-in 300 mAh rechargeable battery with Type-C charging and auto power-off. High-strength rear magnet keeps the meter secure and saves workspace 【Portable & Complete Kit】Includes Kelvin clips, gold-plated tweezer tips, and hooks. Quick plug-and-swap design lets you switch probes fast for different components. Comes with a storage pouch for easy carry and organization