This led ceiling fan light retrofit kit we designed is Lead-free, Mercury-free, No flicker and No UV .and the light temperature is comfortable, We also use it as a reading light .
Ledytech LED Retrofit Light Kit
We design this ceiling fan light retrofit kit for the customers whose ceiling fan light is stop working , Simply retrofit the light instead of purchasing a new ceiling fan.
| Brightness | 2200 Lumen For 200 Square Feet Room |
| Wattage | 18w , 80% Energy Saving and Generate three times brightness than normal bulb. |
| Standard | ETL Listed and Don't worry about usage safety |
| Input | 120V 50/60Hz |
| Size | The size of this LED replacement ceiling fan light kit is 4 inch and the lamp base should be greater than 4.5 inch and less than 10 inch. |
| Dimming Function | Control by Triac Dimming switch for dimming or a conventional switch for turn on and off . |
| Packing | 1xLED ceiling fan light retrofit panel with driver on the board. 3x Magnets 2x 15cm wires 1x Wire Connector 1x PC cover 1x User Manual |
| CRI | CRI 90+ significantly enhances color vibrancy and depth. |
Cut off the power supply.
Remove the damaged light source and BALLAST. and then magnet our new ceiling fan light retrofit kit to the ceiling fan.
Connect wires,positive to positive and negative to negative. and then put the plastic cover back.
Turn on the light .
Do i need an additional driver for this ceiling fan light kit?
No need additional driver , This ceiling fan Light source is Driver On Board design and directly connected to AC 120V 50/60Hz , so please be sure to remove the previous driver before installation, otherwise this product may not work or be damaged.
Can i use this LED ceiling fan light kits ?
Yes, Please check if the previous damaged Light source was directly connected to AC 120V . If so, then our lights are also suitable.
Can i use this LED ceiling fan light source to replace my 15W / 17W / 18w / 20w or 25w damaged light source?
Yes , Our ceiling light fan replacement module is suitable for replacing light sources such as 15W, 17W, 18W, 20W, etc. As long as there is a location for installation.
Can i use this ceiling fan light replacement kit for my ceiling fan which own a aluminum light base ?
Yes, The lamp base is preferably made of iron for easy magnetic installation. If it is not made of iron, we recommend the screw method to install it .
How to make sure if i use this light kit for my ceiling fan or ceiling light ?
Please measure your light base , you can use this light kit if the lamp base is bigger than 4.5 inch and less than 10 inch , and you can also use this light source as a ceiling light retrofit kit .