Friends, I have studied biomagnetic therapy and pulsed electromagnetic field therapy for many years. I have owned and distributed PEMF systems such as the Medithera, iMRS, QRS, Earthpulse and many other systems. I am sincerely impressed with and have confidence in this excellent product. It really is a hidden gem, because this is not a multi-level marketing product with fancy advertising all over the internet. The pulsed magnetic fields of the Aum Pulser are strong and potent, providing great benefit to the body, and can be used all night while you sleep, which makes it totally unique comparted to most other PEMF systems available!

This listing is for the Double Magnetic Coil Aum Pulser. For a single user, two magnetic coils will give even more coverage and benefit to the body. Magnetic coils can be placed as shown in the diagrams, or as you choose for specific places of pain in the body.

Explanation of Program Modes Available in the AUM PULSER

HEALTHY-SLEEP - For dealing with sleep related problems. This mode starts at 9.0Hz, moves to 0.6Hz. Goes through 4 cycles from 0.6Hz to 5.4Hz. Ends the cycle at 16Hz for 20 minutes as an alert mind and wake-up function.

FAST-SLEEP - This mode is designed to help one drop into deep sleep rapidly. Starts with 9.0Hz, moves to 3.69Hz and will run for the selected time you set. At the end of cycle it moves to 16Hz for 20 minutes as an alert mind and wake-up function.?

DEEP-SLEEP - For extreme sleep deprivation or high stress. This mode starts with 12Hz, moves to 1.1Hz and cycles between 12Hz and 1.1Hz. At the end of the selected time cycle it runs at 16Hz for 20 minutes as an alert mind and wake-up function.

AWAKE - For working late or driving with less drowsiness and fatigue. This mode starts with 9.0Hz and moves to 13.1Hz and cycles between 13.1Hz and 14.1Hz. Near end of session completion the device runs at 16hz for 20 minutes.

SCHUMANN - 7.83Hz connects the body with Earth?s natural frequency for balance, harmonization and rejuvenation. This mode runs at a constant 7.83Hz and ends the cycle with 16Hz.??

MANUAL - This mode will run at your selected frequency for your choice of time. Explore and experiment with various frequencies from 0.6 to 16Hz. This mode runs only in your preselected frequency. After session completion, the device runs in 16hz for 20minutes. The resolution of the frequency is 0.01Hz. Selection range is from 0.6Hz to 16Hz.??REVITAL ? For pain and injury management. Stem cell regeneration, overall health. This mode starts with 9.0Hz and moves to 9.6Hz. Then it cycles between 10.8Hz

WELLNESS - Regeneration and health. This mode starts at 9.0Hz and moves to 9.63Hz and runs for the selected time. At end of cycle it will run at 16Hz for 20 minutes.

For Manual Mode frequencies, use this basic and approximate brain wave chart for suggestions. In the morning or afternoon, you may want higher or more stimulating/alert frequencies. At night, it is best to use the lower, sleep enhancing frequencies.

Delta waves: 0.2 - 4 Hz
Theta waves: 4 - 8 Hz
Alpha waves: 8 - 13 Hz
Beta waves: 12 - 30 Hz
Research shows powerful regeneration for the body using 9.6Hz or 10Hz

Intended Use

The Aum Pulser is used for enhanced sleep, performance, regeneration and vitality. Research from around the world verifies and validates these claims regarding pulsed magnetic field therapy.

Benefits

The Aum Pulser is designed and developed based upon PEMF technology. Pulse ElectroMagnetic Field Therapy is quickly becoming a non-invasive way to approach injuries, chronic pain, and even chronic conditions like depression and diabetes.

The Aum Pulser is designed for better sleep, radically accelerated recovery, enhanced daytime performance, and incredible anti-ageing effects.

Regular use of PEMF therapy, besides promoting various healing mechanisms, has been found to have substantially beneficial neuroendocrine, neurological and psychological effects; as well as having the ability to promote bone, tissue and nerve regeneration.

General Instructions To Set Up Aum Pulser

1) Plug Power-Supply Cable into the large jack at back of Program Controller.

2) Plug Power Supply Adaptor into the electricity outlet on the wall (100-240 volts AC). Use International Pin Adaptor if required.

3) Plug the 2 Coil Sets into the remaining 2 jacks at the back of the Program-Controller.

4) Press On/Off button on the Program-Controller. The display shows AUM PULSER and instantly boots to H-SLEEP mode.

5) Press ENTER and use UP / DOWN key to arrive at desired mode.

6) Once desired mode is selected, press ENTER key. The display now shows the Mode and the timer set to 8.00 Hours.

7) Press ENTER and use UP or DOWN key to set the time duration for which you wish to use the device. Time can be set from 15 minutes to 12 hours with changes in multiples of 15 minutes.

8) Press ENTER button and use UP or DOWN key to select the AMPLITUDE.
AMPLITUDE: The display also shows the AMPLITUDE which is, by default, set at 10% for all Modes, since it is best suited to a normal user. You may change the AMPLITUDE if you wish. Press UP or DOWN key to change the AMPLITUDE between the programmed ranges of 10% to 100%. Once the AMPLITUDE % of choice is selected, it automatically gets set.

9) Press ENTER button and the device begins to function. This is established by the blinking of the * in the display and the BLUE LED light on the Program Controller. Aum Pulser is now operative for the desired MODE, TIME and AMPLITUDE. Note - If you make a mistake anywhere in the steps defined above, press the ENTER button, and then restart from Step 5.

The electromagnet coil is placed under the mattress/pillow with its position under the body based upon the area of pain you want to benefit, or simply to just benefit the body if you do not have pain. The control unit does not go under the mattress, but on your nightstand or off to the side of the bed. It is used to set up the program mode and timer to initialize.

For Single User - The magnetic coils can be placed under the mattress, under the head, neck, torso or leg areas as you choose. For Two People, place one magnetic coil under the mattress under each person at your desired location.

Disclaimer

Lipika Technologies makes no medical claims, real or implied, as to benefit of our device and methods. Aum Pulser is strictly a Performance Enhancement Tool utilizing Natural Field supplementation to achieve deeper states of sleep, improved performance and recovery from pain. Our product is not intended to be used to diagnose, treat, cure or prevent any disease. Any information provided by us is not to be construed as medical advice.

Precautions

PREGNANCY: Aum Pulser should NOT be used by pregnant women and infants at all.

PACEMAKERS: Persons with pacemakers, deep brain stimulators, and other electronic implants should NOT use the device at all. Place only the electromagnet under the bedding. DO NOT put the CONTROL BOX unit under pillows or mattress as overheating may occur.

NORTH POLE: North side of electromagnet is positioned toward body at all times.

CLEANING: Aum Pulser device can be gently cleaned by a piece of cloth.

Use adequate padding, for example a folded towel or small pillow between body part and magnetic coil. The coil should NOT directly touch the body part.