Warning:

Please caution extremely when use the MS5902 in the gigantic circuit breaker ark. Don't use when voltage more than 120V/230V AC.You can turn on the flashlight in the dark surroundings.

Features:

·

Automatically and quickly finds correct breaker or fuse.

Quickly and easy identifies conditions of circuit socket.

MS5902-T× Works on 220V AC, MS5902-TB Works on 110V AC

Operating temperature: 0 ~ 50℃

Operation: Locating a Circuit Breaker or Fuse

Keep the pillar at left on the MS5902-T

Plug the MS5902-T into the receptacle.if there is a candescent light

fixture,please install a socket adapter before make sure the switch is

OFF.then plug the MS5902-T into the socket adapter,turn the switch on at

one time.(Socket adapter need purchase additional)

· 

Go to the circuit breaker panel box.

Turn the MS5902-R on,the red LED is light.

Place the chapiter of the MS5902-R directly onto the circuit breaker or fuse.

Slide the chapiter of the MS5902-R down each breaker along both sides of

the panel .Then the MS5902-R will beep frequently as it denote the

relative signal strength.

Move the MS5902-R down each breaker once more. On the third pass,

the MS5902-R will beep ,the red LED will quench and the green LED will

light only at the circuit Breaker powering the MS5902-T.

Push the breaker off and check that the LED on the MS5902-T in the outlet is

off to confirm you have found the correct breaker or buse.

Test Socket Keep the pillar at right on the MS5902-T.

Please contradistinguish nameplate on the MS5902-T.

Maintenance:

Keep clean with a dry cloth.

When the yellow LED is light on the MS5902-R, please unscrew and

remove cover, insert new 9V battery so as to the MS5902-R is well-balanced.