36V 48V 52V 1000W Front or Rear Integral Wheel Conversion Kit 16" 20"

 

Parts Including in this kit:

1.36V 750W / 48V 1000W / 52V 1200W 16"/18"/20" Integral Font or Rear Motorized Wheel (7-speed Freewheel)
16x2.5"/ 18x2.5"/ 20x2.5" Tire and tube installed
2.36V/48V/52V 35A 15 MOSFET 3-mode Sine Wave Controller
3.T24 Color Display (with 5V USB output)
4.Twist Throttle 
5.Brake Levers (Left and Right)
6.Pedelec Sensor (PAS) 

 

 

Motor Specification:

1) High Motor Efficiency: max 88.7% (Save Power)
2) Torque: max torque 40 N.m.
3) RPM: max 450
4) Speed: 0-50 km/h (different wheel size, road & weather condition and rider's weight will have different speed)
5) Hub Dropout Width: Rear 135mm / Front 100mm
6) Support standard 6-hole type disc brake
7) Rear Integral Wheel
8) Voltage: 36V 48V 52V Universal
9) Power: 36V 750W/ 48V 1000W/ 52V 1200W

 

Controller Specification:
1) 36V/48V/52V 35A 15 MOSFET 3-mode Sine Wave Controller
2) Rated Voltage: DC36V or 48V or 52V universal
3) Rated Current: 17A
4) Max Current: 35 +/- 1A
5) Speed set: 1-4.2V
6) Brake Input: Low Level
7) Low Voltage Protection: DC30/40/43V +/- 0.5V
8) Compatible with LCD Display or without Display (need to plug LCD jumper connector)
9) Size: 212x86.5x48.5mm

 

 

Installation Guidance:
1) Unscrew the existing rear wheel screws, remove your rear wheel;
2) Install the motorized wheel and fasten screws;
3) Attach LCD, Brake lever and throttle;
4) Put Controller at suitable position and connect all wires.
5) Turn on battery, throttle key and LCD, set correct value from LCD
Correct wheel size setting: according to your wheel size
Correct motor magnet quantity setting: set it at 46
Save all value and restart LCD display