About this item

• Electric foam cutting tool - Suitable for low density and softer foam boards, such as low density Styrofoam, Pearl Cotton, EPS, Sponge, EPP, KT Board, Cellullar Glass. It is not suitable for high density Styrofoam, Pearl Cotton, EPS, Sponge, EPP, KT Board, Cellullar Glass. Density and tight foam boards, such as XPS, extruded boards, plastic boards, etc.
• Clean and precise cuts - The high-quality stainless steel used in the construction of this foam cutter ensures clean and precise cuts every time. It seals the edges of the foam as it cuts, leaving no debris behind, making it perfect for intricate and small print designs in advertising, hobbyist artwork creation, foam carving, and art making. You can cut the foam boards from any angle and craft them into your desired shape. Different lengths of wand can cut various thicknesses of foam boards.
• Good heating speed - Made of high quality stainless metal. With a 18W power output, the 5cm and 11cm cutting tool can reach 160℃ in just 5 seconds. After 20 seconds, the maximum temperature of the 11cm foam cutter can reach 350℃ , while the maximum temperature of the 5cm wand can reach 280℃ . The bow hot wire is stable at 200℃.
• Product usage - Hot knife foam cutter suitable for cutting pearl cotton, KT board, EPS, sponge, EPP, cellular glass etc,. You can cut foam from any angle and craft your own masterpiece, at the same time it is also perfect for commercial artwork development, complex and small font design in advertisement (such as letters), art piece creation by hobbyist, foam carving, DIY craft projects in home & school.
• Maintenance suggestion - First, Pay attention to ventilation in work and product heat dissipation. Turn off the power and take a break after continuous work for more than 30 minutes.(If working for more than 15 minutes during hot summer days, take a break.) Second, After it cools down, please wipe the heating needle with a damp sponge to avoid blackening and hardening caused by adhesion Of oxides.

Product description

GOCHANGE 3 IN 1 FOAM CUTTER ELECTRIC CUTTING TOOLS KIT

Great Cutting or Engraving Foam Complete Tool Set.

• 18w High Power Foam Cutter with Power Supply .
• On / Off Safety Button.
• Clean and Smooth Cutting, Seals The Edges Clean, Leaves No Debris!
• Heat Up Quickly, The 5 cm and 11 cm Cutting Tool Will Be Reached 160℃ Within 5 Seconds.
• You Can Cut The Foam Board or Foam Block From Any Angle and Craft Into Your Desired Shape.

PRODUCT DESCRIPTION

PRODUCT DETAILS

• ANTI SKID DESIGN: Light weight and the ergonomic designed & non-slip handle to help you operate it in different angles and won’t get strain for large cutting & carving projects.
• HEATING NEEDLE: Sturdy 2.0mm stainless steel needle remains rigid when cutting and carving.
• HOT WIRE KNIFE: For more detail cutting, upgraded new version -- 0.25mm radius cutting wirr hot knife, thicker wire makes cutting easier and faster.

APPLICATION

• Suitable for low density and softer foam boards, such as low density Styrofoam, Pearl Cotton, EPS, Sponge, EPP, KT Board, Cellullar Glass. It is not suitable for high density Styrofoam, Pearl Cotton, EPS, Sponge, EPP, KT Board, Cellullar Glass. Density and tight foam boards, such as XPS, extruded boards, plastic boards, etc.
• The 8.5cm high bow hot wire is not suitable for low-density foam boards thicker than 8cm, the 11cm high straight hot wire is not suitable for low-density foam boards thicker than 11cm, and the 5cm high bending style hot knife is not suitable for low-density foam boards thicker than 4cm. Low density foam board.

SPECIFICATIONS

• Material: Stainless Steel
• Pen Heating Tube Diameter: 2mm
• Heating Needle: 11cm
• Diameter of heat iron for bow: 0.25mm
• Length of Bow: 18cm
• Length of Bending Style Hot Knife: 5cm
• Replacement Wire For Bow: 10m
• Working Power: 18W
• Input: 100-240V AC
• Output: 7.5V/2.5A DC

ADVANTAGES OVER OTHERS