Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
Key Features
Trouble-Free Usage: The 2.76" throat depth of the hydraulic punch greatly expands the range of distance, and the oil return bolt achieves fast pressure relief.
Easy to Operate: You only need to swing the handle back and forth and it can start working, which is very easy to operate.
Complete Punching Dies: It is equipped with 6 different sized punching dies. You can choose freely according to your needs, and it is more convenient to use.
Easy to Carry: This product is equipped with a toolbox. The product and accessories can be neatly placed in the toolbox. You can avoid losing small accessories, which is convenient and easy for you to carry.
Package Included 1* Hydraulic Hole Punching Machine 1* Toolbox 6* Punching Dies
Notes 1.Please tighten the set screw before use. 2.Please note that one punching die has been installed on the machine. 3.The fixing handle contains oil pockets. 4.The upper and lower punching dies must correspond to each other before opening the holes. The edge should be 25mm/0.98inch from the center of the hole. 5.The oil bag is filled with hydraulic oil No. 20. If you find that the hydraulic oil is not enough after a long period of use, you can add oil by unscrewing the bag counterclockwise and removing the rubber plug at the end of the bag. 6.After the hole is opened, you should stop the pressure. Continued pressure will damage the rubber. 7.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.