Milliamp process clamp meters can measure mA signals without breaking the loop.
This is Fluke’s premier mA Clamp Meter, providing you with the best in troubleshooting and process calibration power.
Save time by NOT breaking the loop on 4-20 mA signal measurements.
If you need more time in your busy day take a good look at the Fluke 773mA Clamp Meter. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
Here are some specific ways the Fluke 773 Clamp Meters will help you.
|
*
|
Fluke-771
|
Fluke-772
|
Fluke-773
|
|
*
|
Non-contact mA loop measurement
|
Integrated mA loop troubleshooting
|
Advanced process troubleshooting
|
|
mA measure, jaw
|
|
|
|
|
mA measure, in circuit
|
*
|
|
|
|
Loop power
|
*
|
|
|
|
mA source
|
*
|
|
|
|
DCV measure
|
*
|
*
|
|
|
DCV source
|
*
|
*
|
|
|
mA scaled output
|
*
|
*
|
|
|
mA in / out
|
*
|
*
|
|
|
Environmental Specifications
|
|
Diameter of measurable conductor
|
0.177” or 4.5 mm max
|
|
Operating temperature
|
-10 to 50 ºC
|
|
Storage Temperature
|
-25 to 60ºC
|
|
Operating Humidity
|
< 90% @ <30 ºC, < 75% @ 30 to 55ºC
|
|
Operating Altitude
|
0 to 2000 m
|
|
IP Rating
|
IP 40
|
|
Size
|
44 x 70 x 246 mm (2 7/8 x 5 ¾ x 11 5/8 in)
|
|
Weight
|
410 g, (14.4 oz)
|
|
Vibration
|
Random 2 g, 5 to 500 Hz
|
|
Shock
|
1 meter drop test (except the jaw)
|
|
EMI/RFI
|
Meets EN61326-1
Note: For current measurement w/ JAW, add 1mA to
specification for EMC field strengths of 1V/m up to 3V/m.
|
|
Temperature Coefficient
|
0.01% ºC
(<18ºC or > 28ºC)
|
|
Power, battery life
|
(4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms
|
|
Warranty
|
Three years for electronics
one year for cable and clamp assembly | |
|
Functional Specifications
|
|
mA measurement
(Measured by clamp) 771/772/773
|
Resolution and Range: 0 to 20.99 mA
Accuracy: 0.2%+2 counts
Resolution and Range: 21.0 mA to 100.0 mA
Accuracy: 1% + 5 counts
|
|
mA measurement
(Measured in series with test jacks) 772/773
|
Resolution and Range: 0 to 24.00 mA
Accuracy: 0.2% + 2counts
|
|
mA source (Maximum mA Drive:
24 mA into 1,000 ohms)
|
Resolution and Range: 0 to 24.00 mA
Accuracy: 0.2% + 2counts
|
|
mA simulate
(Maximum voltage 50 V dc)
|
Resolution and Range: 0 to 24.00 mA
Accuracy: 0.2% + 2counts
|
|
Voltage source (2 mA maximum drive current)
|
Resolution and Range: 0 to 10.00 V dc
Accuracy: 0.2% + 2counts
|
|
Voltatge Mesaure
|
Resolution and Range: 0 to 30.00 V dc
Accuracy: 0.2% + 2counts |
|