Druckkopf Fits For Epson WorkForce WF C5790 ET 8700 WF C5290a WF C5290 WF C5890
Hinweis: Dieses Produkt ist nicht brandneu
After installing the printhead, you may notice small gaps or missing lines on the test page.
This is completely normal — the ink needs some time to flow smoothly.
Please follow these steps on your printer:
Press Settings
Go to General Setup → Press OK
Select Maintenance → Press OK
Choose Print Head Cleaning → Press OK
Select:
🔘 Black only
🔘 Colour only
🔘 All → Press OK
Choose Cleaning Strength:
🟢 Normal
🟡 Strong
🔴 Strongest
Press Start – The machine will begin cleaning the printhead.
Leave the printer powered ON and idle (do not use it)
Let it sit for at least 6 hours
After the waiting period, print multiple test pages
✅ In most cases, print quality will return to normal
If minor imperfections remain, perform a second deep cleaning cycle.
💬 If you have questions about this process or run into issues, feel free to contact us via eBay messages — we're here to help!
Please read carefully before purchasing or installing a new printhead. Proper handling can prevent damage to your printer and extend the life of your printhead.
This does not necessarily mean the printhead is faulty.
➡️ The issue may come from the printer frame or mainboard.
✅ Please fix any error codes or system issues before replacing the printhead.
This is often due to a blown fuse on the mainboard.
🔧 Solution: Replace the mainboard or its fuse.
Before installation, check if the data cable is:
🔥 Burned
⚡ Corroded
🚫 Loosely connected
A damaged or unstable cable can burn the printhead and the mainboard.
✅ Please ensure your cable is in perfect condition before proceeding.
The lifespan of your printhead depends heavily on the quality of ink used.
🛡️ We recommend using premium ink, cartridges, or CISS systems to ensure stable performance and avoid clogging or damage.
Printer Print Head Fits For Epson WorkForce WF-C5290a WF-C5790 WF-C5710 WF-C5210 ET-8700 WF-C5290 WF-C589 0WF-C5390 WF-C5310 Pay attenton,the printhead is 14pins. 1. After receiving the nozzle purchased from our store, please don't use the needle to inject water to check whether the nozzle is blocked!!! Don't do that, very important. This is a very redundant and dangerous practice:
First of all, once the print head gets water, if not blow dry before installation. Either the motherboard is burned, or the print head is burned. They are all shipped after rigorous inspection and testing, and filled with protective fluid. If water is injected into the print head with a needle, not only the protective liquid in the print head will be washed away, but also due to the excessive pressure of the hand. It is easy to cause the print head to be blocked and the ink will not come out;
2. The head of the nozzle is very fragile and must not be bumped. It must be protected. Its surface is a block of aluminum with a crystal oscillator and very small ink tubes coated on the inside. After being touched, it will be dented, deformed, or even broken, causing the nozzle to be scrapped;
3. Be careful when installing the nozzle. Be sure to cut off the power first and assemble it in correct place. After installation, gently push the trolley to move left and right by hand to check whether it is smooth. Do not turn on the power after installation, because if the nose is not in place, it is easy to damage the nose when the car moves. Humans have strong sense of hand and can be freely retracted and controlled;
4. When inserting the print head cable, do not have any ink on it. And make sure that it is in good contact with the socket, and do not touch the pins, otherwise the print head will be short-circuited and burned;
5. The steel shaft should also be clean and smooth. Can be wiped with a paper towel dipped in some lubricating oil. Do not add oil directly to the shaft. Excess oil can flow to the nozzle and cause damage;
6. After check the machinery and circuit, and sure they are correct. The ink way needs to be checked. 1). Check whether the ink level of the ink cartridge is sufficient; 2)
package included :1pcs
Besondere Aussage
Alle Artikel haben genügend Nummern in unserem Shop. Wenn Sie mehr davon benötigen, kontaktieren Sie uns bitte. Und wenn Sie andere Teile benötigen, die nicht in unserer Liste enthalten sind, kontaktieren Sie uns bitte auch. Wir haben eine große Auswahl an Druckerzubehör, von denen einige nicht aufgeführt sind. Senden Sie einfach eine Nachricht, um uns zu kontaktieren. Wir helfen Ihnen, den gewünschten Artikel zu finden.
Über die Produktgarantie
Wir versprechen 3-monatige Garantie, wenn es irgendein Problem innerhalb von drei Monaten gibt, kontaktieren Sie uns bitte für Ersatz oder Rückgabe!
VERSAND & BEARBEITUNG
1.Int'l Post Luftpost:
Feste Gebühr für Versand und Bearbeitung, einschließlich Kosten für Verpackung, Lagerung, Vertrieb, Auftragsabwicklung und Bearbeitung. Der Artikel wird innerhalb von 24 Stunden nach Zahlungseingang an den Gewinner versandt. Das Paket mit dem Artikel wird aus Hongkong oder China per Flat Air Mail oder per Einschreiben verschickt.
Die Lieferzeit beträgt in der Regel 1-2 Wochen (max. 3 Wochen). Käufer sind für zusätzliche Nachnahmegebühren, Mehrwertsteuer, Zollgebühren und Einfuhrzölle (falls vorhanden) verantwortlich.
Bitte haben Sie Verständnis dafür, dass die Versandkosten neben den tatsächlichen Versandkosten viele andere Kosten abdecken, wie Lagergebühren, Personal, Paypal-Gebühren, eBay-Endwertgebühren, Listengebühren, Versicherungsgebühren, Verpackungsmaterialgebühren, Bearbeitungsgebühren und so weiter. Bitte geben Sie uns einen hohen Preis für die Versandkosten, damit unser Geschäft fortgesetzt werden kann.
2. Kombinierter Versand:
Weltweit
1. Artikel
Kombinierter Versand
Luftpost 1-2 Wochen
Versand: Kostenlos
Sie können alle Ihre Artikel innerhalb von 14 Tagen nach dem ersten gewonnenen Artikel kombinieren. Es muss eine Zahlung für alle Artikel gleichzeitig erfolgen, damit ein Versand- und Bearbeitungsrabatt gewährt werden kann.
KONTAKTIERE UNS
Bitte benutzen Sie den Link "Verkäufer eine Frage stellen", um uns bei Fragen zu kontaktieren. Normalerweise antworten wir auf jede Nachricht innerhalb von 24 Stunden.
BEACHTEN:
Machen Sie sich keine Sorgen, wenn Sie eine Testseite drucken und feststellen, dass einige Zeilen fehlen. Dies kann darauf zurückzuführen sein, dass während des Transports Luft in das Druckkopfrohr eindringt oder dass Luft in den Tintenpatronen oder im Continuous Ink System (CIS) eingeschlossen ist.
Wenn Sie ein CIS (Continuous Ink System) verwenden, stellen Sie bitte sicher, dass es mindestens 2 cm höher als der Drucker positioniert ist. Es kann sein, dass Tinte in die Tintenpatronen ausläuft und der Druckkopf anschließend in den Standby-Modus wechselt. Stellen Sie das CIS nach 2 Minuten auf das gleiche Niveau wie der Drucker ein, versuchen Sie, den Druckkopf zu reinigen, und Sie sollten eine Verbesserung auf der Testseite feststellen, wobei einige Linien erscheinen. Wenn Sie sofort einen hochwertigen Druck benötigen, fahren Sie mit der Reinigung fort. Wenn die Druckqualität akzeptabel ist, lassen Sie den Drucker eingeschaltet und im Standby-Modus. Nach 24 Stunden sollte sich die Qualität verbessern. Je weiter Sie drucken, desto besser wird die Qualität.
Wenn Sie Tintenpatronen verwenden, schalten Sie bitte den Drucker ein und lassen Sie ihn im Standby-Modus. Versuchen Sie nach 24 Stunden, die Druckkopfreinigungsfunktion auszuführen. 30 Minuten im Standby-Modus, Druckkopf reinigen, weitere 30 Minuten im Standby-Modus, Druckkopf erneut reinigen und diesen Vorgang wiederholen. Sie werden feststellen, dass sich die Druckqualität mit jedem Zyklus verbessert.
Wenn Sie Fragen haben, zögern Sie bitte nicht, mir eine Nachricht zu senden .