Specification:
Type: Headliner Headlining Fabric Upholstery Repair Replacement
Material:Suede + Foam
Thickness: 3mm (1/8") Thick Foam
Model:Headliner Fabric Foam Backed
Manufacturer Warranty:2 Years
Optional Color: Brown / Black / Beige / Grey / light gray
Optional Size:
120CM*150CM / 47" x 60" =19sqft
150CM*150CM / 60" x 60" =24sqft
180CM*150CM / 72" x 60" =29sqft
200CM*150CM / 78" x 60" =32sqft
250CM*150CM / 98" x 60" =40sqft
Package include:
1x Headliner Fabric (Color & Size: Choose from drop down)
Features:
✨1.Thickness:1/8inch(3mm) To determine the size you need, please measure your vehicle headliner from front to back, then add 6 inches.(Note: The headliner fabric is folded for delivery, not delivered in rolls, But Don't Worry, just lay the headliner flat for a few hours and the creases will disappear.)
✨2.PREMIUM QUALITY--Synthetic headliner with foam backing, soft finish and bright appearance, can be easily cut with a knife to fit for any size you want, an ideal headliner replacement and decoration.
✨3.UNIVERSAL FIT-- Soft finsh headliner for protecting your car pillars, preventing car interior damaged by smoke, kids, pets, insulating noise and heat. Commonly be used for sofa or boat seats, mattresses padding, furniture and bedding support. Fit Most Full Size Cars and Trucks and Small SUVs.
✨4.FIT MOST FULL SIZE CARS&SUV&TRUCKS--Our automotive headliner with foam backing is folded and sealed in a clear plastic packaging, for eliminating any creases or wrinkles in the headliner material, giveing a much better final result to your car.
✨5.Satisfatory Service--Using our headiner with foam backing with glue to fix your sagging and ragged headliner quickly and cheaply. If you have any question, please contact us at first. We are always here to solve the prolem.
Note:
✨Please allow 1-2cm differs due to manual measurement
✨As different computers display colors differently, the color of the actual item may vary slightly from the above images, thanks for your understanding
✨The headliner is folded for delivery,not delivered in rolls
✨Can be ironed and May have creases
✨The compatibility list is not absolutely 100% correct. It's only for reference. As the size and shape are different for each vehicle,
✨please measure the size you need for your vehicle , to make sure you have ordered enough area of the headliner to cover.
✨Please also note the headliner is a rectangle, and you will need to cut it into the shape you need to fit your vehicle.
Installation Instructions:

✨Step 1:Remove the Old Headliner
- Take the existing headliner out of the vehicle.
✨Step 2:Prepare & Apply Glue
- Find a large, clean workspace. Lay the new headliner material face up on a table.
- Spray strong glue in a ~6-inch-wide strip down the middle of the headliner.
- Have a friend hold the material up above the headliner panel while you use the plastic paint guide to smooth the material onto the glue.
- After a few minutes, pull the material back to spray glue on the uncovered side. Repeat this spraying and smoothing process until the entire headliner surface is glued.
✨Step 3:Trim & Fold Edges
- Let the glue set overnight. Then, flip the headliner over.
- Cut slits in the fabric to make wrapping around the edges easier.
- Apply a bead of glue along the headliner’s edge, fold the fabric over, and press it down. Try to make the fabric conform closely to the edge.
✨Step 4:Cut Holes & Reinstall
- Cut holes in the fabric for parts like the dome light, sun visors, and retaining clips.
- Replace the headliner back into the car.