🔌 Professional 2-Port PoE Repeater

Extend Your Network - 1 Input to 2 Outputs

✨ Key Features

🔄 2-Port PoE Splitting

Split one PoE connection into two outputs - perfect for powering multiple IP cameras or access points from a single source

⚡ 30W Power Support

IEEE 802.3af/at compliant with 30W maximum input capacity - reliable power delivery for demanding devices

📏 Extended Distance

Extend PoE up to 250m total transmission distance - 100m per segment for flexible installation

🎯 Plug and Play

Zero configuration required - instant deployment with 100Mbps auto-negotiation data rate

📋 Technical Specifications

Input Ports1x PoE Port (IEEE 802.3af/at)
Output Ports2x PoE Ports
Maximum Power30W Input Support
Data Rate10/100Mbps Auto-Negotiation
Transmission DistanceUp to 100m per segment (250m total)
PoE StandardIEEE 802.3af/at Compliant
Operating Voltage48V PoE
InstallationWall Mountable Design

🎯 Perfect Applications

✅ IP Security Cameras: Power multiple surveillance cameras from one PoE source

✅ Wireless Access Points: Extend network coverage to remote locations

✅ NVR Systems: Simplify multi-camera installation projects

✅ IoT Devices: Power smart devices in hard-to-reach areas

✅ Outdoor Installations: Reduce expensive cable runs and infrastructure costs

💡 Installation Benefits

Cost Savings: Reduce expensive PoE switch ports and cabling infrastructure

Flexible Deployment: Install devices exactly where needed without new cable runs

Easy Network Expansion: Add more PoE devices without running new cables

No External Power: Fully powered through PoE input - no additional power supply needed

⚠️ Important Installation Notes

• Maximum 100m cable length per segment recommended for optimal performance

• Total power consumption of connected devices must not exceed input capacity

• Use Cat5e or better cable for reliable 100Mbps transmission

• Verify power requirements of connected devices before installation

PoE Repeater2 Port DesignTechnical SpecificationsInstallation DiagramConnection DetailsPackage Contents

❓ Frequently Asked Questions

Q: What devices are compatible with this PoE repeater?

A: Compatible with any IEEE 802.3af/at compliant devices including IP cameras, wireless access points, VoIP phones, and IoT devices. Works with standard PoE switches and injectors.

Q: Can I connect two 15W cameras to this repeater?

A: Yes, as long as your input PoE source provides at least 30W. The repeater will split power between both output ports based on device requirements.

Q: Does this require any configuration or software?

A: No configuration needed - completely plug and play. Simply connect your PoE input and your devices to the output ports.

Q: What is the maximum cable length I can use?

A: Recommended maximum 100m per segment. You can achieve up to 250m total distance: 100m from switch to repeater, then 100m from repeater to each device.

Q: What cable type should I use for best performance?

A: Cat5e or Cat6 cable is recommended for reliable 100Mbps data transmission and proper PoE power delivery.