ANCEL DS600 Elite All System ECU Coding OBD2 Scanner FCA SGW Car Diagnostic Tool

ANCEL DS600 Elite OBD2 Scanner,  Bidirectional Full System Scan Tool with 34+Resets, ECU Online Coding, FCA SGW AutoAuth, VAG Guide, Wireless Car Scanner Diagnostic Tool with Free Update Lifetime

The DS600 ELITE is an intelligent automotive fault diagnosis tool with an 8-inch touchscreen display. It uses a Bluetooth diagnostic connector, features 4GB of RAM and 64GB of storage, and supports both CANFD and DoIP protocols. It offers functions such as reading and clearing fault codes, reading data streams, reading ID information, performing actuation tests, and special functions such as coding and pairing. However, it lacks online programming.

ANCEL DS600 ELITE  Product Advantages:

⭐All-System OBD2 Scanner Diagnostic Tool :The DS600 ELITE is a powerful all-in-one obd2-scanner that provides full access to all available vehicle systems. It lets you retrieve ECU info, read and clear trouble codes, view live data, and run active tests across every system
⭐ ECU CODING: ECU Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts
⭐ACTIVE TEST (BI-DIRECTIONAL CONTROL ): DS600 ELITE car scanner diagnostic tool Features Full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test,turn on interior & exterior lights, sound horn, test door lock actuators and such.
⭐34+ Maintenance Functions: Which are ABS Bleeding, Battery Matching, Brake Reset, Electric Throttle Relearn, Gear Learn, Oil Maintenance Reset, Steering Angle Reset etc.
⭐Supports Full OBD Diagnostic Functions: Including Reading Codes, Erasing Codes & Reset, Data Stream, I/M Readiness Status, Read Live Data Stream, View Freeze Frame Data, Oxygen sensor monitoring, On-Board Monitor Test, Read Vehicle Information(VIN), Component Test
⭐FCA Autoauth &100+ Brand Mastery: The DS600 ELITE  car scanner allows secure access to FCA vehicle systems for authorized repairs and diagnostics, and supports the latest CAN-FD protocol, enabling high-speed data transmission for faster and more precise diagnostics on modern vehicles. 
⭐Online Customer Service: The DS600 ELITE  offers instant solutions for urgent issues. One click connects you to online support, with automated responses for simple inquiries and live agents for complex concerns. You can also chat via mobile for quick help. It includes a feedback function, and 24/7 tech support. The customer service team is always available for returns, replacements, or troubleshooting, ensuring a seamless after-sales experience.
⭐Powerful Hardware: ACNEL DS600 ELITE  has an Android 10.0 touch operating system, an 8.0-inch HD LCD screen, 4GB of memory and 64GB of storage capacity, and the diagnostic software is upgraded free of charge for life, without having to pay extra fees for the device.
⭐Supports One-click Wi-Fi Connection: Wi-Fi connects the device to the internet, allowing for enhanced diagnostic services and access to the latest information. This device supports the 2.4GHz band. If you choose to skip the Wi-Fi connection, the default English version of the diagnostic software can still be used. However, it is recommended to connect to Wi-Fi during initial setup to easily download the latest version of the diagnostic softwar
⭐One-Click Generate Health Report + Remote Diagnostic, diagnostic feedback and respond, Data Stream record and playback, Vehicle Health Report
⭐Supports 150+ Vehicle Models for Diagnostic:Since the implementation of the OBDII standard in 1996, any vehicle equipped with an OBDII system can perform this function.

Technical Specifications:

Operating System: Android 10
Display: 8.0-inch touchscreen color display
Storage: 4GB RAM + 64GB ROM
Battery: 4150mAh/3.8V (standby >10 days)
Connectivity: Bluetooth VCI, Wi-Fi (2.4/5.0GHz 802.11 ac/a/b/g/n)
Languages: 28 (including English, German, French, Spanish, etc.)
Certifications: CE, FCC, IC

Key Features: Designed for Convenience

1.8.0-inch Touchscreen Color Display: Responsive and easy to navigate, even in bright environments.

2.Bluetooth VCI Connection: Wireless pairing eliminates cable clutter, offering flexibility during diagnostics.

3. Android 10 OS: Smooth performance with 4+64GB storage, providing ample space for data logs and software updates.

4.Long-Lasting Battery: 4150mAh/3.8V battery with over 10 days of standby time. Includes a 3-in-1 charging adapter (EU, US, UK plugs) for global use.

5.Multi-Language Support: 28 languages, including English, German, Spanish, French, Italian, Portuguese, Japanese, Russian, Polish, Turkish, Dutch, Hungarian, Traditional Chinese, Korean, Greek, Slovak, Romanian, Arabic, Croatian, Slovenian, Finnish, Czech, Swedish, Danish, Persian, Serbian, Vietnamese, and Bulgarian.

6.Certifications: CE, FCC, IC compliant, ensuring quality and safety for the (European and American) markets.

Package List:

1 x ANCEL DS600 ELITE Diagnostic Scanner
1 x Bluetooth VCI Adapter
1 x Type-C Data Cable
1 x 3-in-1 Charging Adapter (EU/US/UK Plugs)
1 x 10-Language Paper Quick Start Guide

All-System OBD2 Scanner Diagnostic Tool 
The is a powerful all-in-one obd2-scanner that provides full access to all available vehicle systems. It lets you retrieve ECU info, read and clear trouble codes, view live data, and run active tests across every system—including ECM, BCM, ABS, SAS, EVAP, TPMS, BMS, EPB, Fuel System, A/C, and more. With its AutoScan-Health Report feature, the DS600 ELITE automatically connects to all accessible ECU modules, performing a complete system scan in minutes to quickly pinpoint issues and deliver accurate, reliable diagnostics.

ECU CODING: ECU Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts

Active Test & Bi-Directional Control: Pinpoint Faults Easily

The DS600 ELITE offers bi-directional control and active testing, allowing you to send commands to the vehicle'S ECU and monitor component responses—critical for identifying faulty parts.

Examples of Active Tests include:
Activating the coolant pump to check circulation.
Opening/closing windows to test power window systems.
Controlling headlights, taillights, and turn signals to verify lighting functionality.
Adjusting rearview mirrors to test motor operation.
Triggering the horn to check audio system integrity.
Testing fuel injectors and wiper systems for proper operation.

Note: Active tests depend on the vehicle's electronic control units (ECUs). Only available tests for your specific vehicle will appear in the menu.

ANCEL DS600 ELITE Support 34+ Special Functions

1.Oil Reset
The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset the cluster or driving time to zero after the maintenance,so the maintenance light will go out and the system will start a new maintenance cycle.

2.DPF Regeneration
DPF Regeneration is used to clear PM(Particulate Matter)from the DPF filter through continuous combustion oxidation mode(such us high temperature heating conbustion,fuel additive or catalyst reduce PM ignition conbustion)to stabilize the filter perfornance.
DPF regeneration may be performed in the following cases:
a)The exhaust back pressure sensor is replaced.
b)The PM trap is removed or replaced
c)The fuel additive nozzle is removed or replaced
d)The cataytic oxidizer is removed or replaced.
e)The DPF regeneration MIL is on and maintenance is performed.
f)The DPF regeneration control module is replaced.

3.AFS(headlamp) Reset
The feature is used to initialize the adaptive headlamp system.According to the ambient light intensity,the adaptive headlamp system may decide whether to automatically turn on the headlamps,and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture.

4.EGR Adaption
This function is used to learn the E-G-R(Exhaust Gas Recirculation)valve after it is cleaned or replaced.

5.Brake-Pad Reset
If the brake pad wears the brake pad sense line,the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad.After replacing the brake pad,you must reset the brake pad.Otherwise,the car alarms.
Reset must be performed in the following cases:
a)The brake pad and brake pad wear sensor are replaced.
b)The brake pad indicator lamp is on.
c)The brake pad sensor circuit is short,which is recovered.
d)The servo motor is replaced.

6.IMMO Service
To prevent the car being used by unauthorized keys,the anti-theft key matching function must be performed so that the immoblizer control system on the car identifies and authorizes remote control keys to normally use the car.When the ingnition switch key,ignition switch,combined instrument panel,ECU,BCM,or remote control battery is replaced,anti-theft key matching must be performed.

7.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory,and recover the automatic ascending and descending function of power window.

8.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.

9.Steering Angle Reset
To reset the steering angle,first find the relative zero point position for the car to drive in straight line.Taking this position as reference,the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor ,replacing steering mechanical parts(such as steering gearbox,steering column,end tie rod,steering knuckle),performing four-wheel alignment,or recovering car body,you must reset the steering angle.

10.Injector Coding
Writing injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity.After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that cylinder can better indentify injectors to accurately control fuel injection.

11.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.

12.Transport Mode
In order to reduce power consumption,the following functions may be disabled,including limiting the vehicle speed,not waking up the door opening network,and disabling the remote control key,etc.At this time,the transport mode needs to be deactivated to restore the vehicle to normal.

13.Battery Matching
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery,in which the original low battery fault information will be cleared and battery matching will be done.
Battery matching must be performed in the following cases:
a)Main battery is replaced.Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information.If the related control module detects false information,it will invalidate some electric auxiliary functios,such as automatic start&stop function,sunroof without one-key trigger function,power window without automatic function.
b)Battery monitoring sensor.Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage more accurately,which can avoid an error message displaying on the instrument panel.

14.Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.When the vehicle collides and the airbag deploys,the corresponding fault code of the colision data appears,the airbag indicator lights up,and the fault code can't be cleared.Since the data inside the airbag computor is disposable,it is required that all new accessories must be ewplaced,but after performing this function,the data of the airbag computer can be recovered and the fault code can be cleared,the airbag light will go out,and the airbag computer can continue to use.

15.Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.

16.Cluster Reset
a)cluster reset is to coopy,write,or rewrite the value of kilometers in the chip of cluster by using a car diagnostic computer and data cable,so that the cluster shows the actual cluster.
b)Usually when the cluster is not correct due to the damaged vehicle speed sensor or cluster failure,it is necessary to do cluster reset after maintenance.

17.ABS Bleeding
When the ABS contain air,the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.If the ABS computer,ABS pump,brake master cylinder,brake cylinder,brake line,or brake fluid is replaced,the ABS bleeding function must be performed.

18.Gear Learning
The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computerto more accurately diagnose engine misfires. lf gear learning is not performed for a car equipped withDelphi engine, the MlL turns on after the engine is started.The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car.After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, orcrankshaft flywheel is replaced, or the DTC 'gear not learned" is present, gear learning must be performed.

19.Language Change
This function is used to change the system language of the vehicle central control panel.

20.Adblue Reset
After the diesel exhaust treatment fluid (car urea) is replaced or filled up,urea reset operation is required.

21.Elec. Throtle Adaption
Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learningvalue of the ECU returns to the initial state.By doing these, the movement of the throttle (or idle motor)can be more accurately controlled, thus adjust the intake volume.

22.Suspension Matching
This function can adjust the height of the body.When replacing the body height sensor in the air suspension system,or coontrol module or when the vehicle level is incorrect,you need to perform this function to adjust the body height sensor for level calibration.

23.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.

24.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (NOx)in engine exhaust.If the NOx fault is re-initialized and the NOx catalytic converter is replaced,it is necessary to reset the catalytic converter learned value stored in the engine ECU.

25.TPMS Reset
After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting functionmust be performed to reset tire pressure and turn off the tire pressure MIL.Tire pressure resetting mustbe performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tirepressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged,andtire is replaced for the car with tire pressure monitoring function.

26.A/T Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impactproblem. In this case, this function needs to be done so that the gearbox can automatically compensateaccording to the driving conditions so as to achieve more comfortable and better shift quality.


27.Sunroof Initialization
This function can set the sunroof lock off,closed when it rains,sliding/tilting sunroof memory function,temperature threshold outside the car etc.

28.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware)

29. Motor Angular Position Sensor Calibration
When the motor works in a high temperature environment or in a humid, dusty and other environment for a long time, the angular position sensor is prone to failure, and the signal of the angular position sensor is wrong after the failure, resulting in the motor not working normally, the system reliability is reduced, and the normal driving of the vehicle is affected. . At this time, it is necessary to calibrate the angular position sensor of the motor.

30. Engine Power Balance
High-quality engine balance that helps the engine spin more freely at high revs, improves redline, and increases power

31. High-Voltage Battery Health Inspection

32. Smart Cruise Control Calibration
Intelligent cruise control has the function of improving driving safety and comfort. When the intelligent cruise module is replaced, use this function to learn and match, and the system can function normally.

33. Automatic Air Conditioning Initialization

34. GPF regeneration (particle trap regeneration)
The function of g-p-f is to reduce particulate matter, and it is arranged on the exhaust system of the car to collect the particulate matter in the organic exhaust gas of the car, reasonablyReduce the release of particulate matter, and according to the ECU operation, carry out air oxidation and ignition of the particles in the trap, and then do to regeneration

Supports Full OBD Diagnostic Functions: Including Reading Codes, Erasing Codes & Reset, Data Stream, I/M Readiness Status, Read Live Data Stream, View Freeze Frame Data, Oxygen sensor monitoring, On-Board Monitor Test, Read Vehicle Information(VIN), Component Test

99% Vehicle Coverage & Comprehensive Features
While factory and dealer tools often support only certain vehicles with restricted functions, the ANCEL DS600 ELITE goes beyond, offering extensive coverage for 99% of vehicles across 100+ diverse brands and over 10,000 models. With 10+ maintenance resets, all system diagnosis, it delivers everything needed for complete vehicle service, making it a superior choice for automotive DIY and enthusiasts alike.

Support Protocols:
SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2 ISO, ISO 14230-4 KWP, ISO 15765-4 CAN,CANFD,DOIP

Multi-Language Support:

28 languages, including English, German, Spanish, French, Italian, Portuguese, Japanese, Russian, Polish, Turkish, Dutch, Hungarian, Traditional Chinese, Korean, Greek, Slovak, Romanian, Arabic, Croatian, Slovenian, Finnish, Czech, Swedish, Danish, Persian, Serbian, Vietnamese, and Bulgarian.

Online Customer Service:
The DS600 ELITE offers instant solutions for urgent issues. One click connects you to online support, with automated responses for simple inquiries and live agents for complex concerns. You can also chat via mobile for quick help. It includes a feedback function, and 24/7 tech support. The customer service team is always available for returns, replacements, or troubleshooting, ensuring a seamless after-sales experience.

One-click WIFI Upgrade Function
This function is used to upgrade the diagnostic software. When new vehicle models are released or diagnostic features are optimized, we update the software to ensure the device can effectively detect and diagnose vehicles.
A Wi-Fi connection is required during the upgrade.

Lifetime free upgrades

Easy to Use
Forget the hassle of complicated, time-consuming setup processes. While other systems might require multiple steps like downloading software, entering long codes, and navigating through confusing instructions, we’ve simplified everything into just 3 easy steps:
Select Your Language: No need to deal with tricky language settings buried deep in menus—just pick your preferred language right from the start.

Connect to WiFi: Instantly connect to your home network without any technical jargon or manual configuration.
Agree to the Terms and Conditions: A simple click to agree, and you’re all set—no long forms, no extra steps.

More Frequent Updates for Maximum Compatibility
The latest ANCEL DS600 ELITE is designed to keep pace with evolving vehicle technology. With updates, the scanner continuously expands its database, adding new vehicles and enhanced functionalities. This ensures that you stay ahead without spending extra on software renewals. Best of all, it providing long-lasting value and peace of mind for all your diagnostic needs.

AutoSearch Function
If the VIN code cannot be recognized, you can manually enter the VIN. You can also navigate to the "Diagnose" menu and select the corresponding option based on the vehicle's year and model.

Diagnose Function
In this Function, directly select the corresponding vehicle brand, year, and model. You can then perform a full vehicle diagnostic scan to retrieve the fault codes from all ECUs. Alternatively, you can select a specific ECU system to read fault codes one by one, view data streams, or perform maintenance functions

OBD Function
This function is for diagnosing the engine system, retrieving the status of various sensors and components related to the engine and emissions. This function is applicable to a wide range of vehicles. Since the implementation of the OBDII standard in 1996, any vehicle equipped with an OBDII system can perform this function.

Support one-click feedback
This function allows you to provide feedback when encountering diagnostic errors with certain vehicle models.
These errors may result from undeveloped software features or incorrect diagnostic commands sent by the device.
Please follow the prompts to send the latest diagnostic logs and error descriptions via Wi-Fi, enabling our team to analyze the issue, make improvements, and update the vehicle diagnostic software.

Other Functions:
OBD Fault Code Library: Use the OBD fault codes generated during the diagnostic process to query detailed fault descriptions.

Coverage Lists: Quickly check the supported models and functions available on the current device.

Learning: Access video tutorials that provide guidelines for equipment usage, maintenance, and diagnostics.

Video: Watch instructional videos that demonstrate how to operate the device effectively.

User Manual: Helps technicians quickly understand how to use the device and improve diagnostic capabilities efficiently.

 

1.We accept all common forms of payment such as Credit cards、Debit card、Google Pay ect. 

2.Please contact us if you need to use another method to pay.

3.Payment should be made within 7 days after bidding ends.

4.Otherwise we will be cancle your order.

5.We are not responsible for buyers’ local taxes.

6.Please include your special requests in eBay note if there is any.

1. Shipping terms: UPS or USPS carriers provide transportation services, including economical transportation and standard transportation!

2.All of the items will be shipped to buyer's EBAY address,please confirm your address on Ebay before you buy.Please make sure it is correct and include phone number for delivery.


3.Your order will be usually shipped out the same or next business days once the payment is made and cleared, except on weekends and holidays.Please include your special requests in eBay note if there is any.

4.Most of products are checked and tested carefully before shipment.Well Packed protects your items with suitable material so as to avoid damage during transit.
If your product is damaged upon arrival, please contact us immediately to resolve it. Please do not open a case or return at will. Please believe that we will properly solve your problem.

5. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
If your package delayed few days, due to any unexpected factor, please wait patiently. your kind understanding would be highly appreciated!

1.We can not guarantee that you will be able to access every module or use every piece of cd/dvd software. Compatibility varies due to variations in the cars modlue or availabilty of year it released from original factory

If you are unsure whether your vehicle is compatible, you can contact us and we will respond within 12 hours.
Please provide specific information about your vehicle model (manufacturer, year, model, or VIN), as well as the features you need. Thank you!

2.We are authorize distributor, our all items are 100% original and Our devices have warranty,12 months free repair for the devices.

Please contact us firstly when you need warranty service.

If your product is damaged upon arrival, please contact us immediately to resolve it. Please do not open a case or return at will. Please believe that we will properly solve your problem.We will instruct you on how to return and get refund or replacement.

If you choose to return the product directly without contacting us, please choose the reason for the return: doesn't fit  or doesn't  like it . Thank you! Please don't worry about the return fee, we will bear the return shipping cost for this reason, that is, you can choose this reason to return the product for free! No additional payment required! 100% free return!

1.We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years.

2.We have more than 100 employees devoting to customer satisfaction.

3.We are eager to be your professional parner of automobile diagnostic tool.

4.Welcome to consult us by mail if you have any difficulty in software installation.

1. We are committed to providing customers with the best products and services，Please do not hesitate to leave us your positive feedback if you are satisfaction with our products ,delivery or services .

2. If you have Any Questions, Please do not hesitate to Contact Us by email/ ebay message. We will reply you within 12 hours and do our best solve the problem with you （Except on Weekends and Holidays） .

3.Work time:GMT8 (9:00am-18:30 PM) ,Except for Saturday (9:00-11:00AM) .

Datacaciques