Features:
• Jebao SCP 120-150-180 Cross Flow Wave Maker Pumps
• Upgraded controller with sine wave technology
• 5 Different flow modes: W1, W2, Else, H & C
• Latest cross flow impeller design
• Stronger version magnet base to fit tank glass thicknesses of up to 15mm
• Energy saving low voltage motor
• Rubber magnetic base feet reduces noise
• Powerful water flow and quiet in operation
• Easy installation and maintenance
• No exposed copper elements
• One touch Feed Mode
• One touch Night Mode
• High performance, powerful, water flow combined with low energy consumption
• Ceramic shaft for long life and durability
• Intelligent control system to generate various wave patterns to suit your tank
• Extra long cable for ease and comfort of placement, even on larger tanks
• Low voltage, safe, reliable power supply
• Self protective function, when no water is detected turning off the pump
• Suitable for both Marine and Freshwater applications
• All products CE marked, individually tested and QC passed
• IPX8 over 1 metre water immersion tested and marked
Wave Modes, 5 wave modes can be chosen by pressing the MODE button:
W1. Wave Mode
Dialing the knob is necessary when operating this mode to adjust the wave patterns. As the volume of water in the tank is different from the capacity of the tank the wave period needs to be adjusted by turning the dial. The wave is largest when wave length is dialed in to be same as the length of tank. Increase the wave length by turning the dial clockwise and reduce it by turning it counter clockwise
You should dial the knob gradually and notice the wave pattern in a certain period after each adjustment. Press the SPEED/FEED button to adjust the flow rate
W2. Sine Mode
One or more pumps can operate at the same time in this mode, in this mode the power varies between 30% and 100% and the pattern looks similar to a sine curve
Else. Random Mode
One or more pumps can operate at the same time, it is a random mode as the power of the pump is changing all the time without any set pattern
H. Flow Mode
One or more pumps can operate at the same time in constant flow, the flow rate can be adjusted by the SPEED/FEED button
C. Shift to Flow Mode
Two pumps are required to be operated at the same time, when they shift wave and flow in cycles. P1 work. P2 stop. P2 work, P1 stop, P1 work, P2 stop. The cycle period can be adjusted by switching the knob and adjusting the flow rate by pressing SPEED/FEED
Night Function:
Enter the Night Mode by a long press on the MODE/NIGHT button until the yellow 'Night' indicator lights. It works normally during the day and enters this mode automatically when it is dark when the water flows at the slowest speed. Cancel this mode by a long press on the NIGHT button until the yellow indicator light dims
Feed Function:
Enter the Feed Mode by a long press on the SPEED/FEED button until the blue indicator lights and the pump/s stop working to allow the fish to feed for 10 minutes and automatically return to normal mode. Pressing the SPEED/FEED button during the 10 minutes will cancel this function
Knob Locking Function:
Long press the Wi-Le/LOCK button until the red LOCK indicator lights which shows the current setting is locked. Pressing the Wi-Le/LOCK button will cancel the function
SCP120 Specification:
• Model: SCP-120
• Input: AC 100V ~ 240V 50 / 60Hz 2.75A
• Output: DC 24V 45W
• Dimensions: 30.0cm Wide x 7.0cm Deep x 4.5cm High
• Tank glass maximum thickness: 15mm
• Super extreme magnet included
• For tanks up to 120cm wide
SCP150 Specification:
• Model: SCP-150
• Input: AC 100V ~ 240V 50 / 60Hz 4A
• Output: DC 24V 55W
• Dimensions: 33.0cm Wide x 7.5cm Deep x 5.0cm High
• Tank glass maximum thickness: 15mm
• Super extreme magnet included
• For tanks up to 150cm wide
SCP-180 Specification:
• Model: SCP-180
• Input: AC:100~240v 50/60Hz
• Output: DC 24V 55W
• Flow Rate:8500-10000 gph
• Tank glass maximum thickness: 15mm
• Super extreme magnet included
• For tanks up to:180cm wide
