Alphacool uses a completely new design for the pump to minimize the pump noise and increase the performance. The sucking pump is born. The sucking principle creates less turbulence in the water for a more even flow. This makes the pump nearly inaudible. A novelty on the AiO market.

The cooler is, of course, fitted with a baking plate, which is directly connected to the radiator after assembly, thus ensuring better heat transfer and distribution. This significantly increases the cooling performance. In addition, this also improves the look, since the PCB of the graphics card is hardly visible from the side. Only an opening for the power connections and SLI / CrossFire connectors remain naturally free. The cooler is also modular. If you buy a new graphics card does not have to buy the entire cooler again. Only the aluminum part has to be replaced. Alphacool offers special upgrade kits. This reduces your costs for the next upgrade. This is also unique in the AIO segment.

The hoses and connections are also based on classical water cooling components. The hose is covered with anti-kink springs and has the size 11 / 8mm. The connections are based on the classic G1 / 4 "threads and can therefore easily be exchanged for other models or sizes if desired.

With the two quick-release locks, the cooler can be easily integrated into each cooling circuit. If you are using the Alphacool Eisbaer CPU AIO water cooling system, you can easily combine these with the Eiswolf GPX-Pro via the quick-release fasteners. With the Eisbaer they also have a redundant system since they then have two pumps in the circuit. If one should fail, the second pump is able to maintain the cooling circuit. This is security at the highest level.

Delivery:

     Alphacool GeForce GTX 1070 M01 - with Backplate