eBay

Autophix 7710 Maintenance Function for FIT FOR FORD Vehicles

1.It can support full-system testing of FIT FOR FORD, Lincoln and Mercury brands that are compliant with 12V voltage and 16 PIN connectors .

2.Whether it is a European-made or a FIT FOR FORD produced in the United States and China, it is supported by all places of origin.

3.Large pickups F150, Transit, VAN and other models can also support.

4.As a professional tool for FIT FOR FORD, it supports follows function, RESET PCM KAM , Reset the oil change indicator, EPB Brake pad reset. SAS Steering angle sensor calibration , Reset TCM KAM, Reset Battery Monitoring System, ABS Service Bleed.

5.Special Function: Injector Quantity Adjustment, Clear crash data memory, TPMS RESET, Clear EGR Adaptive Tables, DPF Reset, Reset the Intake Air throttle Valve Learned Values, Reset he Heated Exhaust Gas Oxygen Sensor Learned Values.

6.Automatically identify vehicles with the original factory, you don’t need choose brands. Scanning - System Failure Highlighted, you can know problem clearly. I/M key, it is convenient and quick to use.

7. Support Multi-language: English, German, French, Spanish.

8.7710 is a handy professional scanner for ford vehicles , fastly detects enginge,ABS,airbags,auto transmission,instrument and other control systems..

aeProduct.getSubject()

Autophix 7710 Code Reader OBD Functions:

1, Reset PCM KAM
Vehicles throttles are easily dirty, causing idling instability and acceleration powerlessness ; need to clean the throttle regularly and reset PCM KAM

2, Reset the oil change indicator
When cars run a certain mileage or after a certain period of time, the quality of engine oil deteriorates then need to replace oil. After replacing the oil need to reset oil indicator

3, EPB Brake pad reset
EPB will be placed in maintenance mode with this function, and replacement of brake, brake disc and brake shoes are allowed. Electronic brakes need to do this action

4, SAS Steering angle sensor calibration
Make the steering wheel in the middle position, that is to say the direction of the steering wheel is consistent with the straight forward position of the vehicle
If steering wheel runs away or reset the sensor, do this corrective action

5, Reset TCM KAM

Process of resetting KAM will clear TCM, which has been stored for the adaptive system

6, BMS Reset

Reset the battery monitoring system. Perform this procedure in the following events: battery is replaced or program is reset. (Please do it in the vehicle as instruction with the workshop manual)
If your car has this module, you need to do this after replacing the battery. Generally, Cars with high configuration need to be done, in contrast, it does not need to be done.

7, ABS Exhaust

Exhausting the air in the brake system, which will be operated by two person. One person will step on the brake pedal, and the other will open the brake bleeder screw, and then connect the liquid container. After the air is exhausted, reinstall the screws. You need to operate four wheels at a time.

Autophix 7710 Special Function for FIT FOR FORD Vehicles

1, IQA Injector Quantity Adjustment

It should be performed if a new injector is installed. Each injector has a separate digital code, called the injector correction factor. This code applies separate compensation for each injector to reduce fuel delivery errors. Perform this procedure and enter the required injector code. (diesel cars should be operated)

2, Clear Collision Data Memory

Marked the collision data in the limit control module , the collision data record can be cleared 5 times at most.

3, TPMS Reset
Check tire pressure and correct if necessary. The tire pressure warning light is on, and the tire pressure should be reset after correction.

4, Clear EGR Adaptive Tables
Clear adaptive tables is to clear the new data stored in system storage, and keep original value , it means restored factory setting.

5, DPF Reset
Reset DPF data, and reset learned value of diesel particle filter

6, DPF Regeneration
The Diesel Particulate Filter (DPF) a device that is installed in the exhaust system of diesel vehicle to reduce particulate matter (PM) with the exhaust through filtration

7, Reset the Intake Air Throttle Valve Learned Values
Reset learned value of Intake valve, when updating specific components, the parameters in the module should be reset or configured.

8, Reset the Heated Exhaust Gas Oxygen Sensor Learned Values
Reset the heated exhaust gas oxygen sensor learned value, this service function should be performed if a new heated exhaust oxygen sensor is installed.

aeProduct.getSubject()

1.Automatic vehicle identification ID

2.support All vehicles of Ford from 1996 to 2017 ; It could test all electronic control systems，like ABS, SRS, Transmission, Air conditioner Etc, F150, Transit, VAN all could be supported.

3.Automatic scanning, faulty system are highlighted in red fonts.

4.The list of supported data streams will be detected first, and the user can select all data streams to read or some of the major data streams to read according to his own needs. According to the value of the data stream and the law of change to determine the cause of the failure.

aeProduct.getSubject()

Basic Function for FIT FOR FORD Diagnose:

1, Read DTCs

KOEO Mode (no ignition), KOER Mode (ignition),

2, Clear DTCs,

3, Data Stream

OBD2 Function Covered:

Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

Vehicle Coverage：

For functional supported car model, please inqury us with car model and release year

The device will automatically read VIN information, the Vehicle ID is using the orignal database,

Can support 1996-2017 12V OBD2 16PIN Port Cars for FIT FOR FORD, Lincoln, Mercury

aeProduct.getSubject()

Specifications:

Display：Backlit, Colorful, 320x240 pixel

Operating Temperature：0 to 60°C (32 to 140 F°)

Storage Temperature：0 °C to 80°C (32 to 176 F°)

External Power：8.0 to 18.0 V power provided via vehicle battery

Dimensions：170mmX96.5 mmX29 mm 0.58kg

PACKAGE LIST:

1*AUTOPHIX 7710 FIT FOR FIT FOR FORD VEHICLE SCANNER

1*USB CABLE

1*USER MANUL

aeProduct.getSubject()