ONCE PURHCASED YOU WILL RECEIVE A DOWNLOAD LINK

YOU ARE PURCHASING 3D PRINTING FILES

NO REFUNDS

Stackable 3.5 Inch Hard Disk Drive Mounts with 12x12cm Fan Attachment Holes 3D PRINTING FILES

3D PRINTING FILES ONLY

Please watch the full video about this design

https://youtu.be/B4U_V2UYqX8

For 3.5 Inch Drives (101.6 x 146 x 25.4mm)

I used 5 x WD100EFAX to design and test these mounts

A 120 x 120 x 25mm Fan can be mounted every 4 or 5 drives

If you add a fan every 5 drives there will be a 13mm gap between every fan

If you mount a fan every 4 drives there will be no gap between the fans what so ever

You will need:

HDD's themselves

120 x 120 x 25mm Fans

M3 Hex Allen Key

4 x 6/32 HDD screws per drive

https://www.ebay.co.uk/itm/324460933564

4 x M3 Square Nuts (5.4 x 5.4 x 1.6mm) per fan

https://www.ebay.co.uk/itm/383710131729

4 x M3 18mm total length (16mm thread + 2mm head) 5.7mm diameter head, counter sunk screws per fan

https://www.ebay.co.uk/itm/122324475706

PLEASE NOTE, IN THE IMAGES ATTACHED, I USED BUSHING AS SPACERS FOR THE FANS SO THAT THEY DO NOT TOUCH THE DRIVES

SINCE THEN I HAVE SIMPLY EXTENDED THE MOUNTING PIECES BY 5.4MM (THE SIZE OF THE BUSHINGS) SO THAT THE BUSHINGS ARENT NEEDED

MAKING EASIER TO MOUNT THE FANS

Comes with a PrusaSlicer project file that's meant to serve AS AN EXAMPLE

DO NOT USE THIS PROJECT FILE ON YOUR PRINTER as the custom gcode and printer settings are specifically meant for my custom printer, instead only use this as reference

You are free to sell prints of the files, but please do not resell the files themselves as I put in months of work in prototyping and testing

I recommend printing in PETG on a Textured PEI (I use Nozzle X at 240 hotend and 80 hotbed)

It is designed to be printed with a 0.4mm nozzle at 0.2mm layer height

No refunds as these are digital files