TOUCH-LESS is our new eco-friendly pressure-washer, pre-clean, snow foam which can be applied by pump spray or trigger too. Applied at between 0.5% – 2% PIR, this biodegradable sugar-based product provides truly exceptional levels of cleaning for automotive paintwork. Unlike other petrochemical-based cleaners, TOUCH-LESS is free-and-easy rinsing, easing the effort of subsequent bucket washes and massively helping post-treatments bond too. TOUCH-LESS also contains corrosion inhibitors. Packed in a 1-litre bottle, it contains no phosphates, solvents, NTA, or caustic soda.

TOUCH-LESS is designed to allow for superior and simple application of our new paint protection product, TOUCH-ON.

FEATURES

• Eco-friendly, biodegradable sugar-based formula.
• Free-and-easy rinsing for easier washes.
• Contains corrosion inhibitors.
• Free from phosphates, solvents, NTA, and caustic soda.
• Can be applied via pump spray, trigger spray, pressure washer, or snow foam lance.
• Available in a 1-litre bottle.

HOW TO USE

• TOUCH-LESS may be applied with a trigger spray, pump spray, pressure washer, or snow foam lance.
• Use a dilution rate of 0.5% PIR (Panel Impact Ratio) up to 2% for very dirty vehicles.
• When using pressure equipment, calculate the water delivery to the reservoir.

STEP 1

• Fill the detergent bottle or reservoir on the machine or lance with plain water.
• Turn the detergent feed to full and discharge the lance into a large bucket or container until the detergent bottle is empty.

STEP 2

• For a 2% dilution, measure the total amount collected and multiply by 0.02 (either by volume or weight). This will be the amount of TOUCH-LESS to use.

STEP 3

• Add the calculated amount from Step 2 to the pressure-washer reservoir, top up with cold water, and shake for a few moments.

STEP 4

• Apply TOUCH-LESS to the entire vehicle or panel by panel. Allow to soak for 1-5 minutes (do not allow to dry) and power-wash off.

Note: One litre of diluted product should last for 4-5 washes. Apply to cool panels in shaded conditions. Do not allow the product to dry during use, and keep the bottle neck and lid clean.