Stepper Motor Driver Controller, Forward and Reverse Control Pulse Speed PLC Serial Communication, DC 5~30V/4A Universal for NEMA 17/23 Motor
About this item
- 2 in 1 :This SMC02 is Stepper motor controller + stepper motor driver, which can be directly connected to the stepper motor.
- Motor Type : Working for DC10-30V Two phase 4-wire 5-wire 6-wire 8-wire stepper motor
- 9 Working Modes: The module has built-in multiple fixed operation modes, and users can quickly select the appropriate motion trajectory to meet different application scenarios
- 4 Control Mode : In addition to its built-in parameters work mode,it can also control by external buttons or others driver or UART commands
- LCD Display: The LCD screen can clearly display the speed/delay/cycle time, control the motor with high precision, and the controller parameters support the memory function that will not be lost
Product Description
Feature：
1. This is an operation control module specially designed for single axis stepper motors.
2. The module has multiple built-in fixed operation modes, and you can quickly select the appropriate motion path.
3. You can save and set the distance/speed/delay/cycle times when power off.
4. It is suitable for 2 phase stepper motors whether it is 4-wire or 5-wire or 6-wire or 8-wire.
5. It has built-in drivers and controllers, but can also control similar interface drivers.
Note:
1. Kind reminder: The user manual has been uploaded to the Amazon page under Technical Specifications or Images. Please download it.
2. It can work independently as a module, or it can be used in conjunction with other systems. It can be used in general industrial control occasions, but it cannot be used in special industries such as medical treatment and fire protection.
|
|
|
|---|---|---|
1. In the running interface, the rotary encoder to adjust the speed, CW Button - Forward Rotation, CCW Button - Reverse, RUN/STOP Button - Run Stop and Exit. 2. Press and hold the encoder to enter the menu setting. | 1. In the menu setting interface, rotate the encoder to adjust and change the parameter codes F-01~F-13. 2. Long press the encoder, save the parameters and exit, enter the running interface. | 1. In the menu setting interface, short press the encoder to enter the F-X X corresponding menu parameter setting state, the parameter flashes, then short press to shift, and rotate the encoder to adjust the parameter. 2. Short press the RUN/STOP button to exit the parameter setting. |
| Model | Stepper Motor Controller + Driver |
| Suitable Motor | 42/57 Step Motor(Nema17/23 Motor) |
| Number of Axes | Single-axis |
| Motor Signal | Common Cathode |
| Power Supply Range | DC 5-30V |
| Driving Capability | 4A (Max) |
| Acceleration/Deceleration | Available |
| Command Features | Streamlined optimization of multiple commonly used commands |
| Speed Range | 0.1-999 circle/minute |
| Forward/Reverse Pulse Count | 1-9,999 pulses |
| Cycle Work Times | 1-9,999 times |
| Forward/Reverse Delay Time | 0.1-999 seconds |
| Subdivision Selection Range | 1-32 |
| Subdivision | 1/2/4/8/16/32 |
| Reverse Input Protection | Available |
| System Main Functions | Automatic, Manual, Setting, and Serial Control |
