eBay

USB 10 Watt Mini Immersion Heater for Demi-John & Fermenting Bucket

The Mini Homebrew Immersion Heater is great if you have your fermenter inside you home, but just need that little extra little bit of heat to get it to the right temperature.

The Mini USB immersion heater submerged in your homebrew and using the temperature setting control, set it to switch on and off to automatically maintain the right temperature in your fermenter.

The temperature control is in °C and will go from 18°C to 34°C in 0.5° increments.

This USB Mini Immersion Heater must be uséd with a USB source that can supply a minimum of 2 Amps. Any less and this can cause your USB plug to burn out. Please check the rating of your USB plug before using.

The USB Mini Immersion Heater is pretty powerful for it's size, with 10 Watts of heating capability. It has a built in thermometer in the element to make sure it heats to the correct temperature.

Simply insert the immersion heater into your brewing bucket or demijohn and plug it in. Use the simple temperature controller to select the desired temperature and let it do the rest.

These Mini Immersion Heaters are ideal for the winter months when it may get colder in the house.

This immersion heater is suitable for all types of fermentation vessel up to 25 litres.

The immersion heater is fully waterproof and is designed for keeping home brew at the correct brewing temperature and will automatically switch on and off to maintain the correct temperature.

We recommend removing the 10W sticker off the heating element and attaching the Suction cup to the rubber section of the element.