Product Name:Bead Knife
Material:Tungsten steel/45# steel
Characteristics:Sharp, sturdy, long life
Application:Softwood/Hardwood/Solid wood
Attention:When grooving, please wear good protective glasses, gloves, dust mask, etc.
Wipe it clean after use and store it with anti-rust oil to prolong its service life.

Note: The following precautions will help to protect the knife.
The following precautions are conducive to the protection of the life of the knife, please read them carefully.
Wood Selection：
The thickness of the wood used should be slightly larger than the diameter of the knife.
For example, for 18mm round diameter, it is recommended to use 20mm thickness of wood.
Core Adjustment：
Adjust the length of the centre drill to 5mm longer than the wood.
i.e. 5mm longer than the wood from the bottom of the diameter.
Adaptation of the table drill: Adjust the table drill to the maximum speed and slow down the cutter.
Flipping: When flipping, the position of the centre drill must be aligned with the eye of the centre hole.