Holybro DroneCAN PM08-CAN Power Module 14S 200A For RC Model/Airplane/Quadcopter
Product Description
Feature
Supports 2-14S & 200A Cont, 400A Burst
DroneCAN Communication Protocol
Small & Compact Design
Two 5V Output with Independent BEC IC and Circuitry
Separated Sensor and BEC Board to Minimize Electrical Noise Interference
Galvanically Isolated Current Sensor IC (AEC-Q100 Grade 1 qualified)
High Accuracy Temperature Sensor for Temperature Monitor
High-Efficiency Aluminum Heat Dissipation Shell
Specifications
Processor:STM32F405RG 168MHz 1024KB Flash 196KB RAM
Voltage input: 7~60.9V (2S~14S)
Continuous current:200A
Burst current
400A @ 25℃ 1 sec
1000A @ 25℃ < 1 sec
Max current sensing: 376A
Voltage accuracy: ±0.1V
Current accuracy: ±5%
Temperature accuracy:±1℃
Power port output: 5.3V/3A each port
Protocol: DroneCAN
Operating temperature :-25℃~105℃
Firmware upgrade: Support
Calibration: Support
Interface Type
Power & CAN Port: Molex CLIK-Mate 2mm 6Pin
Battery IN/OUT Options:
XT90 Connectors
Tinned Wires
XT90 & Ring Terminals
Status LED
Flashing quickly continuously: MCU is in the bootloader stage, waiting for firmware to be flash
Flashing quickly for 3 seconds, and then on for 1 second: Waiting for CAN connection
Flashing slowly (one-second intervals): CAN is successfully connected
Mechanical Spec
Size: 45mm×41mm×26mm (Not Include Cable)
Weight: 185g (Include Cable)
Reference Links
PX4 & Autopilot Setup Instruction
PM08CAN 3D CAD File Download
Power Module Dimension
Supports 2-14S & 200A Cont, 400A Burst
DroneCAN Communication Protocol
Small & Compact Design
Two 5V Output with Independent BEC IC and Circuitry
Separated Sensor and BEC Board to Minimize Electrical Noise Interference
Galvanically Isolated Current Sensor IC (AEC-Q100 Grade 1 qualified)
High Accuracy Temperature Sensor for Temperature Monitor
High-Efficiency Aluminum Heat Dissipation Shell
Specifications
Processor:STM32F405RG 168MHz 1024KB Flash 196KB RAM
Voltage input: 7~60.9V (2S~14S)
Continuous current:200A
Burst current
400A @ 25℃ 1 sec
1000A @ 25℃ < 1 sec
Max current sensing: 376A
Voltage accuracy: ±0.1V
Current accuracy: ±5%
Temperature accuracy:±1℃
Power port output: 5.3V/3A each port
Protocol: DroneCAN
Operating temperature :-25℃~105℃
Firmware upgrade: Support
Calibration: Support
Interface Type
Power & CAN Port: Molex CLIK-Mate 2mm 6Pin
Battery IN/OUT Options:
XT90 Connectors
Tinned Wires
XT90 & Ring Terminals
Status LED
Flashing quickly continuously: MCU is in the bootloader stage, waiting for firmware to be flash
Flashing quickly for 3 seconds, and then on for 1 second: Waiting for CAN connection
Flashing slowly (one-second intervals): CAN is successfully connected
Mechanical Spec
Size: 45mm×41mm×26mm (Not Include Cable)
Weight: 185g (Include Cable)
Reference Links
PX4 & Autopilot Setup Instruction
PM08CAN 3D CAD File Download
Power Module Dimension
We accept all verified payments from ebay.
Orders will be shipped after receiving cleared payment.
Payment due within 7 days after auction ends and for buy it now listings.
Orders will be shipped after receiving cleared payment.
Payment due within 7 days after auction ends and for buy it now listings.
1.We will ship based on the information provided by your order. Please ensure that the address and contact information are correct. If the delivery fails due to the buyer filling in incorrect information, our store will not be responsible.
2.If the delivery address is remote or in another country, it may take longer. Please be patient and wait.
3.Order placed on weekends or holiday will be handled and shipped on Monday or next working day.
4.If the item has not been delivered after the delivery time, please contact us promptly.
2.If the delivery address is remote or in another country, it may take longer. Please be patient and wait.
3.Order placed on weekends or holiday will be handled and shipped on Monday or next working day.
4.If the item has not been delivered after the delivery time, please contact us promptly.
1.If there are quality or usage issues with the purchased items, you can contact the store to solve the problem. We will try our best to help solve the problem as quickly as possible. Please do not leave negative feedback directly.
Our office hours are :
- 9:30 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- Our office is closed on public holidays (China). We apologize for the late reply during the holidays.
We have always been trying to provide the best service and reliable products for every customer. Please contact us to resolve any issue before leaving negative feedback . we will assist you in any way possible and aim to answer all emails .
- 9:30 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- Our office is closed on public holidays (China). We apologize for the late reply during the holidays.
We have always been trying to provide the best service and reliable products for every customer. Please contact us to resolve any issue before leaving negative feedback . we will assist you in any way possible and aim to answer all emails .
1, Light reflection and different displays may cause the color of the item in the picture a little different from the real thing.
Copyright © 2023 Dianxiaomi