25 Premium quality smooth hardwood maple

facegrain (smooth) tapered plug for 1 inch diameter hole

x 5/16" thick.

FLAT HEAD PLUGS for screw holes.

Use these to cover screw holes in any woodworking project.
This size is common in stair and floor use.

Tapered to be hammer tapped into 1" dia. hole.

Plug measures 1.015" at top (about 1/64" larger than 1"),

so it will hold firm in the hole and .985" at the bottom.

Our plugs are face-grain which gives an attractive smooth "face"
as opposed to end grain which is rough and open pore.

To install FLAT HEAD PLUGS, place a small dab of glue in the hole

and hammer-tap the button to seat it FLUSH.
Use a tapping block about 3" square, over the plug and tap the block
with hammer to seat the plug and not damage the plug or floor or stair.

1" diameter is the mounting hole size.