JL Audio C3-570
5"x7" 6'x8' Component/Coaxial Speakers Changeable Speaker 150W
FEATURES
Evolution® C3 5 x 7 / 6 x 8 in. / 125 x 180 mm Convertible Components
Also fits 6x8-inch factory locations. Perfect fit in most newer Ford vehicles.
This speaker system is a perfect fit for many Ford vehicles and others that accept a 5x7-inch or 6x8-inch speaker. Configured for two and four-hole mounting configurations.
Woofers:Injection-Molded Polymer Frame, Patented Elevated Frame Cooling (U.S. Patent #6,219,431 & #6,229,902), DMA-Optimized Motor System, Mineral-Filled Polypropylene Cone, Rubber Surround, 1.2-in. / 31 mm Voice Coil, Kapton® Former, Low-Profile, Symmetrical Roll Spider, Ferrite Magnet
Tweeters:1.00 in. / 25 mm Silk Soft Dome with Ferrofluid Cooling and Damping and Neodymium Magnet Fixed Angle Flush-Mount, Surface-Mount and Coaxial-Mount Systems
Continuous Power Handling:75 Watts
Rec. Power Range (per channel): 25 - 150 Watts
System Efficiency:90.0 dB @ 1W/1m
96.0 dB @ 1W/0.5m
System Nominal Impedance:4 ohms
System Frequency Response:48 Hz - 25 KHz ± 3 dB
Woofer Specs
Woofer Frame Outer Diameter* (A): 5.52 x 7.68 in. / 140.2 x 195.1 mm
Woofer Magnet Outer Diameter (C): 4.08 in. / 103.6 mm
Frontal Coaxial Tweeter Protrusion*** (D): 0.78 in. / 19.8 mm
Woofer Mounting Depth (G): 2.52 in. / 64.0 mm
Tweeter Specs
Flush Mount Fixture Diameter (A): 2.12 in. / 53.8 mm
Flush Mount Mounting Hole Diameter (C): 1.875 in. / 47.6 mm
Flush Mount Mounting Depth (D): 0.71 in. / 18.0 mm
Surface Mount Fixture Diameter (E): 1.93 in. / 49.0 mm
Surface Mount Protrusion (F): 0.95 in. / 24.1 mm
Crossover Specs
Height (A) 4.72 in. / 119.9 mm
Width (B) 3.36 in. / 85.3 mm
Depth (C) 1.44 in. / 36.6 mm