Product Description:

• Our item 12V back up camera is a universal backup camera for cars,trucks,RVs,pickups with RCA video input connector, it support flush mount installation or bracket mount installation, hd high clear no distortion image, starlight level night vision, IP69 IP rating reliable waterproof level and horizontal 170 degrees wide view angle.

Product Features:

• Rear/Front Switchable: Optional Customized Distance Scale Lines & Mirror/Normal Image Switchable - You Can Use it as Rear View Backup Camera or Front/Side Camera Note: By default this is a reverse camera (mirror image) with distance scale line

• Rear view camera surface mount support IP69K waterproof IP rate. It designed with fully sealed glue filling craft, so the waterproof effect is better than IP67 and IP68, you absolutely no need to worry about water, fog or mist inside. NOTE: please separately order a suitable harness to complete installation if connect it to a FACTORY RADIO.

• Reverse camera flush mount support both CVBS and AHD video signal output(great for Android stereos).CVBS by default,cut the purple wire loop to choose AHD format video signal (AHD,720P,30fps). It with starlight level night vision (0.005Lux,excellent low-light performance),you never worry about parking during night,

• Car backup camera's housing is metal,2 in 1 installation option design(surface or flush mount option).Also it is built in 3 multifunctional switching loops: cut the white loop for front view, cut the green loop to remove the guidelines and cut the purple loop to choose AHD format(AHD,720P,30fps)video signal output.

Product Note: 

• According to our experience, some cheap or old Android stereos have the setting of AHD format video signal input option, but the truth it does not work, because their hardware inside do not support it. If so, please use the default CVBS video signal output (do not cut the purple wire loop, otherwise you will get a black screen).

• This backup car camera flush mount doesn't fit sucked type dash cam and mirror dash cam, because these dash cam have different connectors and inside PIN definition, even some of them with same size 4 PIN connector. If connect this hitch flush mount backup car camera to a GPS navigator, such as Garmin or TomTom, please separately order one more adapter which with a RCA to 2.5mm connector to complete installation.

• Before you cut this flush mount car backup camera's purple wire loop to choose AHD format 720P 30fps video signal output, please make sure your Android stereos support AHD format video signal input first(most of old Android stereos do not support it,and it works well on selected ATOTO car stereos (work well on F7 Series, S8 series and A6 KarLink version,can not work on ATOTO A6Y Series Android stereo or SA102 Starter).

2 Important Wires/Loops Control Design:

• Our backup camera with 2 small wires/Loops (White and Green color).

• Cut the white loop to cancel the guidelines if you don’t need it.

• Cut the green loop: the mirror image (for rear view) at default will change to be non-mirror image (for front/side view).

• Look backward, keep the green loop; look forward, cut the green loop.

Detailed instruction:

• If you use it as a backup camera with guidelines, please keep both white and green wire/loop, because this camera is a back up. camera with guideline/parking line as DEFAULT;

• If you use it as a backup camera without guidelines, please only cut the white loop, keep the green wire/loop;

• If you use it as a front/side view camera with guidelines, please only cut the green loop, keep the white wire/loop;

• If you use it as a front/side view camera without guidelines, please cut both white and green wire/loop;

• Please power off the vehicle and power on again after you cut the small l

Package includes

• 1PCS