Bitmain Antminer APW12 PSU ( APW121215 version d) for Antminer S19
Brand New Original Bitmain Antminer APW12 12-15V version d Power Supply. Compatible with Antminer S19/T19/S19 Pro/S19j/S19j Pro/S19a/S19a Pro/S19 XP/S19jPro+/S19k pro etc SHA256 air-cooled bitcoin miners.
Will replace all APW121215a, b, c, d version PSUs.
Rule of thumb for Antminer S19 PSU replacement is to replace with a version number that's same or higher than existing PSU.
Ships within 24 hours of purchase from St. Louis, MO
| APW121215d Specifications | ||
| OUT1 | DC Voltage | 12V-15V |
| Rated Current(220 V input) | 233A | |
| Ripple & Noise | <1% | |
| Line Regulation | <1% | |
| Load Regulation | <1% | |
| Setup Time | <2S | |
| Short Circuit Protection | >10mS | |
| OUT2 | DC Voltage | 12.3V |
| Rated Current(220 V input) | 15A | |
| Ripple & Noise | <1% | |
| Voltage Accuracy | 12.2V---12.4V | |
| Line Regulation | <1% | |
| Load Regulation | <1% | |
| Setup Time | <2S | |
| Short Circuit Protection | >10mS | |
| Input | Voltage Range | 200-240V AC |
| Frequency Range | 47-63Hz | |
| Power Factor | >0.99(full load) | |
| Leakage Current | <1.5mA（220V 50Hz） | |
| Protection | Low-voltage Input | 80-89V AC |
| Output Short Circuit | Yes | |
| Overheat Protection | Yes | |
| Over-current Output | 291A-350A （protection value varies under different voltage） | |
| Environment | Operating Temperature | -20-45℃ |
| Operating Humidity | 20%-90%RH（non-condensing） | |
| Altitude | < 2000m | |
| Structure | Dimensions | 254.6mm*251.6mm*63mm |
| Net Weight | 3.6KG | |