Nickel Plated Brass Fixed Male Stud Quick Fittings with Tapered BSP Threads





Quick or PushOn fitting - Stud made from nickel plated brass to suit tube sizes 4mm up to 15mm outside diameter.

Available with BSP tapered male threads.

The quick fitting must be used with the tube with correct inside AND outside diameter.

This is a high quality fitting which makes a reliable joint and is suitable for compressed air, vacuum, water and almost any other fluid which is compatible with the materials.

The fitting is reusable and can be assembled by hand or using very basic handtools. Simply undo the nut, slide it back over the tube, push the tube onto the spigot and then do up the nut by hand or using a spanner.





Technical Data
Operating Temperature -20 °C up to +80 °C
Operating Pressure up to 20 bar
Materials Nickel Plated Brass
BSPT Threads DIN EN 10226
Medium Pneumatic
Oil Hydraulic
Hydraulic Circuits





ITV ØD R H L A B
Ref
10003 4/2.7 (mm) 1/8” BSPT 7.5mm 23.0mm 8.0mm 12.0mm
10004 5/3 (mm) 1/8” BSPT 7.5mm 23.0mm 8.0mm 12.0mm
10005 6/4 (mm) 1/8” BSPT 7.5mm 25.5mm 10.0mm 12.0mm
10006 6/4 (mm) 1/4” BSPT 11.0mm 27.0mm 10.0mm 14.0mm
10007 8/6 (mm) 1/8” BSPT 7.5mm 27.0mm 12.0mm 14.0mm
10008 8/6 (mm) 1/4” BSPT 11.0mm 28.5mm 12.0mm 14.0mm
10009 8/6 (mm) 3/8” BSPT 11.5mm 29.0mm 12.0mm 17.0mm
10010 8/6 (mm) 1/2” BSPT 14.0mm 32.0mm 12.0mm 22.0mm
10011 10/8 (mm) 1/8” BSPT 7.5mm 29.0mm 14.0mm 14.0mm
10012 10/8 (mm) 1/4” BSPT 11.0mm 33.0mm 14.0mm 14.0mm
10013 10/8 (mm) 3/8” BSPT 11.5mm 33.5mm 14.0mm 17.0mm
10014 10/8 (mm) 1/2” BSPT 14.0mm 36.5mm 14.0mm 22.0mm
10015 12/10 (mm) 3/8” BSPT 11.5mm 35.0mm 15.0mm 17.0mm
10016 12/10 (mm) 1/2” BSPT 14.0mm 38.0mm 15.0mm 22.0mm
10017 15/12.5 (mm) 1/2” BSPT 14.0mm 40.0mm 22.0mm 22.0mm




Please see BSP Thread Size Chart Below