
ATTENTION!!!
This listing is for a REPAIR KIT THAT WE WILL INSTALL in your original ABS pump control module. You are not buying the module shown in photos.
After checkout, you will send us your 2008-2015 Honda Pilot Vehicle Stability Modulator (ABS Module). We will inspect it, install the repair kit, perform final testing, and then send it back to you. Your repaired module will arrive ready to install back on your vehicle.
No additional programming or coding is required. You can still drive the vehicle while the module is removed. Repairs typically take 1-2 business days. In certain cases, repairs may take longer due to the condition of the module.
Common problems addressed by this REPAIR KIT include:
DTC 66-11: Pressure Sensor Circuit Malfunction
DTC 66-13: Pressure Sensor Malfunction
DTC 81-19 Yaw rate sensor inside malfunction
DTC 121-11: VSA Solenoid Valve Malfunction
DTC 122-11: VSA Solenoid Valve Malfunction
DTC 123-11: VSA Solenoid Valve Malfunction
DTC 124-11: VSA Solenoid Valve Malfunction
DTC 31-11: ABS Solenoid Valve Malfunction
DTC 32-11: ABS Solenoid Valve Malfunction
DTC 33-11: ABS Solenoid Valve Malfunction
DTC 34-11: ABS Solenoid Valve Malfunction
DTC 35-11: ABS Solenoid Valve Malfunction
DTC 36-11: ABS Solenoid Valve Malfunction
DTC 37-11: ABS Solenoid Valve Malfunction
DTC 38-11: ABS Solenoid Valve Malfunction
You must provide us with the trouble codes.
This REPAIR KIT fits most 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Honda Pilot VSA Modulators (aka ABS Pump Control Module).
***Some Honda Pilots are equipped with a different type of ABS module that we are unable to repair. Please make sure your module looks like the one we show in the listing photos. If the housing of your module is rectangular in shape, do not purchase this service. ***
Compatible Part Numbers Include, but not limited to:
57110-T2G-A77, 8D16D-0049, 0B12D-0080, 1C09D-0226,
57110-S9V-A72, 57110-STW-A01, 57110-STW-A02,
57110-STW-A03, 57110-SZA-A03, 57110-SZA-A02, 57110-SZB-A03,
57110-SZB-A02, 57110-SZB-A11, 57110-SZA-A12
Please do not send the pump - send only the control module as it is shown in the photo
!!!ATTENTION!!!
There are 2 metal contact prongs connecting the VSA modulator (ABS module) to the hydraulic pump. Sometimes those contacts will come out on the module side during removal. THE CONTACT PRONGS MUST BE INSTALLED ON THE PUMP SIDE BEFORE RECONNECTING THE MODULE. If you do not install the module properly, the contacts will bend and touch each other, creating an electrical short that will destroy the VSA modulator. If your module is destroyed as a result of not following these instructions, your warranty will be voided. Please be advised.
We highly recommend having removal and installation of your module done by a professional mechanic, however, do it yourself instructions are available. If you would like them, please send us an email after checkout.
Disclaimer: The symptoms described can be caused by other problems on the vehicle. It is your mechanic's responsibility to pinpoint the problem to the ABS pump control module. All possible causes for ABS system failure must be eliminated prior to sending your module for repairs. Please note, not all modules are repairable.