SNES NTSC / Super Famicom RGB Kabel Luma / CSYNC für Super Nintendo, High End AV
- Dies ist ein RGB-Kabel für den NTSC Super Nintendo / Super Famicom.
- Die R-, G- und B-Kabelstränge sind mit den benötigten 220uF Kondensatoren ausgerüstet.
- Das RGB-Kabel kann mit Sync-Ausgabe per "Sync-on-Luma" oder "CSYNC" bestellt werden. Dies sorgt für störungsfreie Bildübertragung, was besonders wichtig ist beim Einsatz von hochwertigem Video-Equipment (OSSC, Framemeister, RetroTINK-5X Pro, GBS-Control, usw.).
- Bitte beachte: das Kabel darf NUR an Super Famicom / US SNES Konsolen verwendet werden. NIEMALS an PAL SNES oder PAL GameCube!!!
FAQ/INFO zu Sync:
Wir bieten das Kabel in 3 verschiedenen Varianten an:
CSYNC - 470 Ohm Res. / CSYNC - passthrough / Sync on Luma
Welche Variante ist am besten?
Kurze Antwort: CSYNC - 470 Ohm Res.
Erklärung:
Die Variante "CSYNC - 470 Ohm Res." ist kompatibel mit NTSC SNES und Super Famicom und passt ebenso für die meisten anderen Anwendungszwecke, wie beispielsweise RGB-Mods für NES / Famicom oder Nintendo 64.
Die Varianten "CSYNC - passthrough" und "Sync on Luma" werden in der Regel nicht benötigt und werden hier für Experten angeboten, welche eine spezielle Kabel-Konfiguration benötigen.
- Bei sonstigen Fragen, schreibe uns gerne ein Nachricht.
- Falls du ein anderes RGB-Kabel für SNES, N64 oder GameCube suchst, schau gerne unsere anderen Angebote durch.
Bitte beachte: die SNES Jr. und Super Famicom Jr. Konsolen benutzen zwar auch den Multi AV Out Connector, können aber nativ kein RGB-Signal ausgeben. Hier wird ein RGB-Mod benötigt - auf Nachfrage auch bei uns im Shop erhältlich. Bei Interesse, schreibe uns gerne eine Nachricht.
=================================
SNES NTSC / Super Famicom RGB Kabel Luma / CSYNC für Super Nintendo, High End AV
- This is an RGB cable for the NTSC Super Nintendo / Super Famicom.
- The R, G and B cable lines are equipped with the required 220uF capacitors.
- The video-cable is wired for sync output via "Sync-on-Luma" or "CSYNC". This ensures interference-free image transmission, which is particularly important when using high-quality video equipment (OSSC, Framemeister, RetroTINK-5X Pro, GBS-Control, etc.).
- Please note: this cable may ONLY be used with Super Famicom / US SNES consoles. NEVER with PAL SNES or PAL GameCube!
FAQ/INFO about Sync:
We offer the cable in 3 different versions:
CSYNC - 470 Ohm Res. / CSYNC - passthrough / Sync on Luma
Which version is the best?
Short answer: CSYNC - 470 Ohm Res.
Explanation:
The "CSYNC - 470 Ohm Res." version is compatible with NTSC SNES and Super Famicom and is also suitable for most other use cases, such as RGB mods for NES/Famicom or Nintendo 64.
The "CSYNC - passthrough" and "Sync on Luma" versions are generally not needed and are offered here for experts who require a specific cable configuration.
- If you have any other questions, please send us a message.
- If you are looking for a different RGB cable for SNES, N64 or GameCube, please have a look through our other offers.
Please note: While the SNES Jr. and Super Famicom Jr. consoles also use the Multi AV Out connector, they cannot natively output an RGB signal. An RGB mod is required for this – available in our shop upon request. If you're interested, please send us a message.