eBay

Most commonly used for corrosion protection.
Leaves an oil film on the protected part.
A relatively hard coating that is excellent for long-term storage and protection from rough handling.
Part numbers UPC codes etc. can be easily seen through any of the transparent type 1 colors.
Recommended dipping temperature for all type 1 coatings is 350°F.

Dip seal coatings are not compatible with other dip seal coatings. Do Not Mix Together!
Coatings have good non-conducting electrical properties.
Dip seal materials are non-toxic.
Should have Mechanical ventilation heat resistant gloves safety glasses and acceptable OSHA face mask when dipping.
Coatings sold in 10 lb. bags.