Wedge
type tension clamp H15, dead-end clamp for FTTH cable
Anchoring,
wedge-shaped tension clamp H15 is suitable for FTTH: for
self-supporting aerial cables and ADSS fiber optic cables - round cable,
oval or flat cables with the diameter from 0,08 to 0,23” (2 - 6 mm).
This clamp provides you an ability to fasten the cable, without exposing
the cable or separating supporting element. The installation does not
cause any damage to the sheath. This clamp has several names: wedge type
tension clamp for cable suspension, dead-end clamp, wedge fastening
clamp, anchor clamp and similar.
There are few steps of fastening the cable using this anchor clamp:
partial extension of the wedges into the housing;
cable insertion;
cable clamping;
insertion of a steel hook.
With the use of this clamp, it is possible to fasten 3 types of cables: round cable, oval or flat cables. Clamp H15 consists of a plastic frost and UV resistant body, polymeric wedges and loop made of a hot-dip galvanized steel.
Allows an easy manual installation without any tools for building overhead communication lines on utility poles. It fastens by a loop to the utility poles with the help of hooks, brackets, etc.
The hook is made of high quality galvanized steel wire.
Technical characteristics:
Maximum spans between fastening points 131 ft. (40 m)
Working load - up to 0.5 kN; > Breaking load - 1.1 kN;
Loop thickness — 0,11” (3 mm)
Operating temperatures -40 to +140°F (-40°C – +60°C)
Distinctive
feature of our clamps is that under extreme conditions (frosting, trees
falling, hurricanes, etc.) the clamp is destroyed without the damage to
the cable which, in some cases, prevents line breakage.
Our
tension clamps are made of high-quality materials and are able to
operate under the extreme conditions and loads. It designed for a fast
mounting of self-supporting optical and other cables on the utility
poles.