- Spaces each wheel by 5mm (10mm per axle)
- 63.4mm centre bore fits perfectly on hub (hub-centric)
- Kit includes 2 x spacers
- Hub centric design - no vibrations
- Fits original and after-market wheels
- Can be fitted to the front or rear
Why Fit Spacers?
Fitting wheel spacers can improve looks and handling. They can also give you the much needed clearance required when fitting some after-market alloy wheels.
NOTE: It is your responsibility to check that you have the necessary wheel arch clearance.
Hub-centric design; NO wheel vibrations!
The spacers in this kit should NOT be confused with cheap universal items! They are precision machined and designed for a perfect hub-centric fit.
This means they fit perfectly central on the hub and cannot disturb the vehicles wheel balance.
The spacers are machined from billet aluminium - not cheap cast aluminium and they are clear anodised for long lasting corrosion protection.
Check!
1. Be sure that you have the necessary clearances available to fit these spacers. Please measure the space available inside the arch lip and with respect to other suspension components.
2. Check the wheel stud lengths. We recommend that you have at least 30mm of thread protruding from the hub before the spacers is added. However, this may vary depending upon the particular wheels fitted. It is your responsibility to ensure that you have enough turns of the wheel nut to be safe.
3. On Volvos that use wheel bolts (as opposed to wheel nuts), please ensure that the thread length on the bolts is long enough to accommodate an extra 5mm.
THESE CHECKS ARE YOUR RESPONSIBILITY!
What Volvo vehicles will this fit?
These spacers can be used with most Volvo vehicles that have a 5-hole wheel pattern. If in doubt check the PCD measurements are 5x108. Please ensure you have the necessary wheel arch lip clearance to accommodate the extra width.
The ebay compatibility tool does not represent a complete list of all Volvo models that this will fit. If your car is not listed in the tool, it may still fit!
Specifications
Spacer material: Billet aluminium
Spacer finish: Clear anodised
Spacer thickness: 5mm
Spacer overall diameter: 149mm
Spacer centre hole (hub centre diameter): 63.4mm
Spacer PCD of bolt holes: 5x108mm
Our stock code: 2JX