If you are interested, you can watch videos on youtube using the words: "  ловля на кружки  " , and you will see how to catch it, this is a very interesting kind of fishing

To begin with, you need to make grooves as in the photo.

Wound 10 meters line with a slippery loader lever and hook

Catching the summer Tip Up can be both a beast and a peaceful fish. To fish, you need to set a fry above the bottom or seaweed, skip over the top of the line and lower the Tip Up to the surface of the water when a pike or other predator bun - Tip Up turns around - it's a signal for fishing that fish on the hook.

The arrangement of the circles on the pike is quite simple. Having measured the required depth, we leave the loaded fry tackle in the water, and pass the thread through the first slot in the circle, make a turn through the mast, lead into the cut at the top and, after holding the circle in the opposite slot, let the gear drift. It is also possible to fix the mark on the filament in the form of a piece of foam or a knot from the tape for fixing the measured depth.

So we launch in turn the circles for catching pike in free swimming. We launch in such a way that they float downstream from the boat. Current and wind are their main engine when fishing. If there is no flow, the circles can be installed in a staggered manner, given the proximity of the likely promising areas of fishing. The distance between the circles is chosen not less than 15 meters, otherwise, there is a chance to confuse the snap. The greatest length of the alloy gear to half a kilometer, within reach and field of view.

After placing the circles on the pond, the fisherman looks after his small fleet. It is desirable to do this from behind and a little from the side. But you need to be able to quickly respond to biting.