The EasySeal self-adhesive roofing system has been designed to remove the requirement for hot bitumen and or naked flames for anyone installing roofing membranes. EasySeal is a two-layer high performance system, which was originally developed for small roofs, such as those over garages, porches, extensions and dormer windows etc. However, the fire-safe benefits of EasySeal are equally applicable for large projects. The self-adhesive application process, using no hot bitumen, gas torches or large amounts of messy liquids, makes it an ideal option for experienced contractors or competent DIY installers alike.
Properties
Length : 6m.
Width : 1m.
Roll size : 6m2.
Roll weight : 20kg.
Weight : 3.33kg per m2.
Cap sheet
EasySeal Cap Sheet is manufactured with a high performance polyester base, coated with SBS modified bitumen. The upper surface is finished with a slate mineral. The underside is protected by a release film, which is removed during installation. The EasySeal slate mineral has a 75mm selvedge for ease of lap jointing.
Application
IKO EasySeal roofing membranes should be installed generally in accordance with BS 8217: 2005, ‘Code of Practice for Reinforced bitumen membranes for roofing’ and IKO fixing instructions. EasySeal roofing is applied as a two-layer system, bonded by the removal of the release film on the reverse of the product, in accordance with the detailed 'Step by Step' fixing instructions available from IKO.
In cool weather conditions, the use of a hot gun air will assist the self-adhesive bond of the coating at lap joints. Note: Hot bitumen or gas torches should not be used.