Xps Insulation Boards For Underfloor Heating systems
Available in 6,10 & 20MM Depth options
Living Heat XPS Thermal Insulation Boards offer an efficient, cost-effective solution for improving the performance of electric underfloor heating systems.
Suitable for both concrete and wooden sub-floors, XPS insulation is a versatile choice for a wide range of flooring projects.
These lightweight and durable boards are the recommended underlay for Living Heat Aluminium Foil mats when installed beneath rubber-backed LVT flooring (minimum thickness 5mm).
With the correct insulation installed, this will maximise heat output and energy efficiency of your UFH system.
You May Also Require
| Things to know about this product |
|---|
| Available in 6, 10 and 20mm depths |
| Suitable for use with electric and water under floor heating systems |
| Suitable for use with tile, stone and wood floors |
| Suitable for use with all standard 1 part flexible tile adhesives and concrete screeds |
| Manufactured in compliance with BS EN ISO 9001:2001 and certified by BBA Certificate 04/4186 |
| Complies with BS EN 13164: 2001 thermal insulation products for buildings |
| Easy and safe to handle |
| Technical Information |
|---|
| Depth Options: 6mm, 10mm, 20mm Boards Size: (6mm,10mm x 620mm x 600mm). or 20mm (600 x 600mm) SQM Coverage: 0.37 Fire Classification: Euroclass E - Not For Exposed Use Compatibility: UFH Foil Mats, Embedded UFH, Click Flooring (Rubber Backed) Temperature Range: -50 / +75 Degrees Density: 30kg/m3 Thermal Conductivity: 0.030 W/mK Thermal Resistance (R): 0.17 @ 6mm, 0.29 @ 10mm, 0.57 @ 20mm, 0.86 @ 30mm m²-K/W Water Absorption: <0.7% |
| For Use With |
| All types of electric and water under floor heating systems |
| On top of concrete and timber sub-floors |
| Under all ceramic, porcelain, natural slate and stone floors, (except mosaics) |
| Under wood and laminate floors |
| Characteristics Include |
| High thermal insulation capacity, (blocks out the cold) |
| Totally inert, (does not degrade with time or external conditions) |
| Light easy and safe to handle |
| Easy to cut with sharp knife / fine tooth saw |
| Resistant to tile cement, building cement and most other building compounds |
| Water and damp proof |
| High compression ratio. (minimum 30 tonnes, (yes tonnes!) per sqm) |
| Environmentally friendly |
| In Detail | ||
|---|---|---|
| Thermal Conductivity W/mK | 0.039 | Prevents heat loss |
| Thermal Resistance sqmK/W | 0.17-0.86 | Blocks out cold |
| Nominal Density Kg/m3 | 30 | Weight of 1 m3 |
| Compression strength KPa 25% | 300/400 | A maximum of 35 tons can be placed on 1m2 without damage |
| Water penetration (96 hours) | 0.00 | Waterproof |
IMPORTANT: To make sure you receive the correct sizes, if you are unsure of what you require, please do not hesitate to contact ourselves. If possible please provide us with a sketch or measurements of the floor area you would like covered and we will advise you on which product would best suit your requirements.