It is shrink-wrapped in clear film, and under the film the black factory tape running the length of the seam has not been cut. Two yellow strapping bands run around it, also uncut. There is a close-up of the tape, a full view of the long edge, and both end panels, so you can check all of that yourself rather than take my word for it.
Two things in those photos are not damage. The end panel is stapled as well as taped — that is how ViewZ builds the carton, not a sign that someone has been inside it. And the box has honest shelf wear: scuffs and a crease or two on the printed face, grime on the end panel, tape patches at the end. It has been sitting in a warehouse since it was made. The box is not mint. The seal is intact. Those are two different claims and I am only making the second one.
The label on the carton lists the monitor and a remote controller. That is what the manufacturer prints, and it is the only thing I will promise on a sealed box.
For what it is worth: the identical open-box unit I tested also held a power cord (a standard PC / IEC kettle cord — the supply is built in, there is no brick), a green DC 24V terminal-block plug, a Quick Reference Guide and the IP PVM manual on CD, all still in factory bags. I expect this box to be packed the same way. I am telling you what I found in the other box, not promising what is in this one, because I would have to break the seal to check, and then it would not be sealed.
Every line below is printed on the box label, which is photographed.
| Model | ViewZ VZ-PVM-I2W3N, white |
| Screen | 23″ as marked on the unit's own label. ViewZ's own literature calls it 23.6″; I have gone with the lower figure, which is the one on the product. 1920×1080 @60Hz |
| Panel | 3000:1 contrast, 250 cd/m², 20 ms gray-to-gray |
| Camera | Built-in 2 MP, centred under the screen |
| Video in | HDMI, VGA, BNC |
| Audio | Audio in |
| Camera out | IP over RJ-45, plus BNC |
| Power | Built-in AC supply (standard PC cord), or DC 24V on the terminal block. 36 W max |
| Mounting | VESA 200×200 and 100×100. No stand or mount is listed on the label |
| UPC | 815562020638 |
Worth knowing before it arrives, from the twin unit I opened: every connector lives behind a hinged panel on the back held by two thumbscrews, and the cables exit through a cover along the bottom edge. That is deliberate — it is a public-facing monitor, so nothing is meant to be reachable from the front. If you get it out of the box and cannot find the inputs, that is where they are.
If you do not need the seal, I have the tested open-box unit listed separately and cheaper. Same model, same colour, and that one I can tell you works because I watched it work. Search my other items, or message me and I will send you the link.