• Fit for:
  • This rear lip measures 81 cm (32 inches) in total length.  The flat mounting surface on your rear bumper MUST be a minimum of 81 cm wide for proper fitment.  Suitable for mid-size sedans, large SUVs, large estates & medium vans.  May fit performance compact hatchbacks/coupes ONLY IF the rear bumper flat section meets the 81 cm minimum width requirement. Fitment is NOT guaranteed for compact vehicles.
  • Universal Fit Reference Vehicles (for reference only; measurement is priority)
  • For E36 E46 E93 E90 E92 32" Rear Bumper Spoiler Diffuser Lip Shark Fin Splitter

    Fit for:

    This rear lip measures 81 cm (32 inches) in total length.
    The flat mounting surface on your rear bumper MUST be a minimum of 81 cm wide for proper fitment.
    Suitable for mid-size sedans, large SUVs, large estates & medium vans.
    May fit performance compact hatchbacks/coupes ONLY IF the rear bumper flat section meets the 81 cm minimum width requirement. Fitment is NOT guaranteed for compact vehicles.

    Universal Fit Reference Vehicles (for reference only; measurement is priority)

    Compact Performance Cars:
    For Seat Leon Cupra MK3 MK3.5
    For Volkswagen Golf MK5 MK6 MK7
    For Mini Cooper S 04-22
    For Skoda Octavia, Kodiaq
    For BMW Z3, Z4 E85
    For Audi TT TTS 8J 2006-2014
    For Mazda 3, 5, 6, MX5, MX6, CX3
    For Volkswagen Jetta MK6 6.5 MK7
    For BMW 1 Series E87 E81 116i
    For Seat Ibiza

    General Brand Compatibility (Most Models):
    For Honda, Acura, Mazda, Subaru, Nissan, Toyota, Lexus, Infiniti, Mitsubishi
    Mercedes-Benz, Audi, Volkswagen, Porsche
    For Ford, Chevrolet, Cadillac, Lincoln, Buick

    Mid-size / Large SUV, MPV, Van & Estate:
    For Volkswagen Caddy MK3 MK4 MK5
    For Volkswagen Transporter T5 / T6 / T6.1
    For Volkswagen Touareg, Volkswagen Passat B7 B8 Estate/Saloon, Volkswagen Golf MK7 GTI GTD
    For Vauxhall / Opel Vivaro, Opel Insignia
    For Audi A4 A5 A6 A7 Q5 Q7
    For Land Rover Range Rover Sport, Discovery 3, 4
    For Mercedes-Benz V-Klasse W447, E-Class W212 W213, GLC GLE
    For BMW 5 Series F10 G30, X3 X4 X5
    For Ford Mondeo, S-MAX, Galaxy
    For Peugeot Traveller / Expert

     

    Important Notes:

    ·NOT suitable for small city cars, regular compact hatchbacks or vehicles whose rear bumper flat section is narrower than 81 cm.
    ·Special reminder for large vans & MPVs (Transporter, Caddy, V-Klasse, Vivaro etc.): Overall bumper width is wide, but the central flat mounting surface may not reach 81 cm on some facelift models. Fitment cannot be fully guaranteed without physical measurement.
    ·Special reminder for compact performance cars (Leon Cupra, Mini Cooper S, Golf MK5/MK6, Audi TT, 1-Series etc.): Many of these vehicles are at the critical width threshold. Trimming or modification will very likely be required.

    CRUCIAL PURCHASE REMINDER:

    IMPORTANT – PLEASE MEASURE YOUR REAR BUMPER FLAT AREA BEFORE PURCHASE TO AVOID UNNECESSARY RETURNS!
    This is a universal aftermarket accessory, NOT a vehicle-specific molded part. Even listed models may require minor modification/adjustment depending on bumper variant, trim level or facelift version. Always double-check your bumper flat width before ordering.

    (Compatibility Chart is for Reference ONLY!!!)
    (Please Compare with your required product and the image we provided to Decide Fitment)

     

    Specifications:

    Product Material: ABS Plastic
    Product Colour: Matte Black
    Style: 10 Fin Shark Fin Design
    Dimensions: 810 * 162 * 52 mm/32" x 6.5" x 2"(L x W x H)
    Placement on Vehicle: Lower, Rear
    Packaging Weight: 690 g
    Packaging Dimensions (cm): 46 x 18.5 x 8

     

    Features:

    *Sporty Rear Diffuser Styling
    Upgrades the lower rear bumper with a sporty 10-fin shark fin and matte black finish, giving the vehicle a cleaner and more performance-inspired appearance.

    *Lower Bumper Protection
    Acts as a protective barrier for the lower rear bumper, helping shield the rear skirt from road debris, light scuffs and driveway scrapes.

    *Durable Construction
    Made from sturdy ABS plastic for a lightweight and practical construction, helping the diffuser handle everyday outdoor use, moisture and normal road conditions.

    *Flexible Installation Options
    Includes double-sided adhesive tape and a screw mounting kit for installation on suitable rear bumper surfaces. The diffuser can be fitted using the appropriate method for your bumper and installation requirements.

    *Universal Size & Fitment Check
    Requires a flat mounting area at least 32" (810 mm) wide on the lower rear bumper. This is a universal accessory, and minor trimming or adjustment may be required depending on the bumper shape. Please measure the flat mounting area before purchase.

     

    Package Includes:

    1 Set of Rear Bumper Diffuser Lip Spoiler:
    1x Rear Bumper 10 Fins Diffuser
    9x Screws
    1x 3M Tape

    ----------------------------------------------------------------------------------------------------------------------------------------------------

    Why choose us

     

    →Superior Quality
    We have dedicated quality inspectors, and each product will be carefully inspected after production. Make sure the product is in good condition and can be used normally.

     

    →Cost-effective price
    We purchase raw materials in large quantities to ensure low costs, so we can achieve higher quality at the same price.

     

    →Perfect customer service
    24-hour online customer service 
    to answer a series of questions about products, models, quality, prices, etc.

     

    →Thank you for your support,We have a little surprise for you
    If your birthday is coming soon, provide proof of birthday to receive an exclusive birthday discount

    If you have any questions, please feel free to contact us at any time

     


    Item Specifics
    Brand AUXITO
    Type Rear Bumper Diffuser Lip Spoiler
    Placement on Vehicle Lower, Rear
    Seller Warranty 5 Years
    Classic Car Part No
    Performance Part Yes
    Features 10 Fins, Durable, Cut to Fit, Adjustable Fitment
    Colour Matte Black
    Material ABS Plastic
    Finish Matte
    Warranty Period 5 Years
    Grade High Quality
    Unit Quantity 1
    Unit Type Set
    Country of Origin United Kingdom
    Fitment Type Direct Replacement
    Universal Fitment Yes
    Product Type Rear Bumper Diffuser / Spoiler Lip
    Style 10 Fin Shark Fin Design
    Overall Length 810 mm / 32 in
    Mounting Hardware Included Yes
    Number of Fins 10
    Body Type Saloon, SUV, Estate, MPV, Van, Coupe
    Fitment Check Measure Rear Bumper Before Purchase
    Vehicle Specific No
    Modification Required May Be Required
    Features Vibration Resistant, Lightweight, Weather Resistant
    Items Included Diffuser, 9 Screws, Double-Sided Tape
    Number of Pieces 1 Set
    Installation Method Tape and Screws
    Attachment Type Self-Adhesive, Screw-On
    Item Width 162 mm / 6.5 in
    Mounting Surface Flat Rear Bumper Area
    Item Height 52 mm / 2 in
    Minimum Mounting Width 810 mm / 32 in

    Payment

     

    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 1 business day.
     
    (2). Before payment, please keep the consistency of Paypal address and ebay address.
     
    (3). Quantity orders are welcome!
    Shipping
    (1).We will ship item locally for US buyers. If you don't get it on time, please contact us firstly, we'll try our best to support you.
     
    (2).For US customers, all items will be shipped out within 1 business day, the carrier is USPS.
    Returns
    (1). We offer 30 days free return policy. Please contact us within 30 days from the date you receive your order if you have any issues with the product or want return. Refund will be send after we got your resend package.
     
    (2). All returned items should be in the original packaging , return tracking information should be provided .
    Contact Us
    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.
     
    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.
     
    (3).We're AUXITO official store. Our office hours are Monday - Friday 9:00AM - 6:00PM PST, but we will reply once we get your message. There will be some delay of response if you send message or E-Mail on weekend.
    FAQ
    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include some vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes Royal Mail will not update a tracking number until it has arrived at its destination. If your item still don't arrive after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q4: Neither side lighting up? Both sides flicker, hyper flash, or work inconsistantly.
    A:Check the light fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor. Even though some bulbs are built-in resistors, they may still need a decoder.
     
     If you have a decoding problem or any other problems, please contact us first, we will help you with it. We will reply you within 24 hours in working days. I'm a new seller, thanks a lot for your trust and convince! I will serve you with all my heart. 

    Shop Category
    Picture
    For E36 E46 E93 E90 E92 32" Rear Bumper Spoiler Diffuser Lip Shark Fin Splitter

    Fit for:

    This rear lip measures 81 cm (32 inches) in total length.
    The flat mounting surface on your rear bumper MUST be a minimum of 81 cm wide for proper fitment.
    Suitable for mid-size sedans, large SUVs, large estates & medium vans.
    May fit performance compact hatchbacks/coupes ONLY IF the rear bumper flat section meets the 81 cm minimum width requirement. Fitment is NOT guaranteed for compact vehicles.

    Universal Fit Reference Vehicles (for reference only; measurement is priority)

    Compact Performance Cars:
    For Seat Leon Cupra MK3 MK3.5
    For Volkswagen Golf MK5 MK6 MK7
    For Mini Cooper S 04-22
    For Skoda Octavia, Kodiaq
    For BMW Z3, Z4 E85
    For Audi TT TTS 8J 2006-2014
    For Mazda 3, 5, 6, MX5, MX6, CX3
    For Volkswagen Jetta MK6 6.5 MK7
    For BMW 1 Series E87 E81 116i
    For Seat Ibiza

    General Brand Compatibility (Most Models):
    For Honda, Acura, Mazda, Subaru, Nissan, Toyota, Lexus, Infiniti, Mitsubishi
    Mercedes-Benz, Audi, Volkswagen, Porsche
    For Ford, Chevrolet, Cadillac, Lincoln, Buick

    Mid-size / Large SUV, MPV, Van & Estate:
    For Volkswagen Caddy MK3 MK4 MK5
    For Volkswagen Transporter T5 / T6 / T6.1
    For Volkswagen Touareg, Volkswagen Passat B7 B8 Estate/Saloon, Volkswagen Golf MK7 GTI GTD
    For Vauxhall / Opel Vivaro, Opel Insignia
    For Audi A4 A5 A6 A7 Q5 Q7
    For Land Rover Range Rover Sport, Discovery 3, 4
    For Mercedes-Benz V-Klasse W447, E-Class W212 W213, GLC GLE
    For BMW 5 Series F10 G30, X3 X4 X5
    For Ford Mondeo, S-MAX, Galaxy
    For Peugeot Traveller / Expert

     

    Important Notes:

    ·NOT suitable for small city cars, regular compact hatchbacks or vehicles whose rear bumper flat section is narrower than 81 cm.
    ·Special reminder for large vans & MPVs (Transporter, Caddy, V-Klasse, Vivaro etc.): Overall bumper width is wide, but the central flat mounting surface may not reach 81 cm on some facelift models. Fitment cannot be fully guaranteed without physical measurement.
    ·Special reminder for compact performance cars (Leon Cupra, Mini Cooper S, Golf MK5/MK6, Audi TT, 1-Series etc.): Many of these vehicles are at the critical width threshold. Trimming or modification will very likely be required.

    CRUCIAL PURCHASE REMINDER:

    IMPORTANT – PLEASE MEASURE YOUR REAR BUMPER FLAT AREA BEFORE PURCHASE TO AVOID UNNECESSARY RETURNS!
    This is a universal aftermarket accessory, NOT a vehicle-specific molded part. Even listed models may require minor modification/adjustment depending on bumper variant, trim level or facelift version. Always double-check your bumper flat width before ordering.

    (Compatibility Chart is for Reference ONLY!!!)
    (Please Compare with your required product and the image we provided to Decide Fitment)

     

    Specifications:

    Product Material: ABS Plastic
    Product Colour: Matte Black
    Style: 10 Fin Shark Fin Design
    Dimensions: 810 * 162 * 52 mm/32" x 6.5" x 2"(L x W x H)
    Placement on Vehicle: Lower, Rear
    Packaging Weight: 690 g
    Packaging Dimensions (cm): 46 x 18.5 x 8

     

    Features:

    *Sporty Rear Diffuser Styling
    Upgrades the lower rear bumper with a sporty 10-fin shark fin and matte black finish, giving the vehicle a cleaner and more performance-inspired appearance.

    *Lower Bumper Protection
    Acts as a protective barrier for the lower rear bumper, helping shield the rear skirt from road debris, light scuffs and driveway scrapes.

    *Durable Construction
    Made from sturdy ABS plastic for a lightweight and practical construction, helping the diffuser handle everyday outdoor use, moisture and normal road conditions.

    *Flexible Installation Options
    Includes double-sided adhesive tape and a screw mounting kit for installation on suitable rear bumper surfaces. The diffuser can be fitted using the appropriate method for your bumper and installation requirements.

    *Universal Size & Fitment Check
    Requires a flat mounting area at least 32" (810 mm) wide on the lower rear bumper. This is a universal accessory, and minor trimming or adjustment may be required depending on the bumper shape. Please measure the flat mounting area before purchase.

     

    Package Includes:

    1 Set of Rear Bumper Diffuser Lip Spoiler:
    1x Rear Bumper 10 Fins Diffuser
    9x Screws
    1x 3M Tape

    ----------------------------------------------------------------------------------------------------------------------------------------------------

    Why choose us

     

    →Superior Quality
    We have dedicated quality inspectors, and each product will be carefully inspected after production. Make sure the product is in good condition and can be used normally.

     

    →Cost-effective price
    We purchase raw materials in large quantities to ensure low costs, so we can achieve higher quality at the same price.

     

    →Perfect customer service
    24-hour online customer service 
    to answer a series of questions about products, models, quality, prices, etc.

     

    →Thank you for your support,We have a little surprise for you
    If your birthday is coming soon, provide proof of birthday to receive an exclusive birthday discount

    If you have any questions, please feel free to contact us at any time

     



     

    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 1 business day.
     
    (2). Before payment, please keep the consistency of Paypal address and ebay address.
     
    (3). Quantity orders are welcome!
    (1).We will ship item locally for US buyers. If you don't get it on time, please contact us firstly, we'll try our best to support you.
     
    (2).For US customers, all items will be shipped out within 1 business day, the carrier is USPS.
    (1). We offer 30 days free return policy. Please contact us within 30 days from the date you receive your order if you have any issues with the product or want return. Refund will be send after we got your resend package.
     
    (2). All returned items should be in the original packaging , return tracking information should be provided .
    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.
     
    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.
     
    (3).We're AUXITO official store. Our office hours are Monday - Friday 9:00AM - 6:00PM PST, but we will reply once we get your message. There will be some delay of response if you send message or E-Mail on weekend.
    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include some vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes Royal Mail will not update a tracking number until it has arrived at its destination. If your item still don't arrive after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q4: Neither side lighting up? Both sides flicker, hyper flash, or work inconsistantly.
    A:Check the light fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor. Even though some bulbs are built-in resistors, they may still need a decoder.
     
     If you have a decoding problem or any other problems, please contact us first, we will help you with it. We will reply you within 24 hours in working days. I'm a new seller, thanks a lot for your trust and convince! I will serve you with all my heart. 

    All rights reserved.



    On Nov 9, 2026 at 05:32:55 GMT, seller added the following information:

    Datacaciques