Descriptions:
Autoclave Steam Sterilizer
Attention！After the sterilization,there will be a slight water leakage problem,which will not affect the normal use.Please mind carfully
Description:
Chamber capacity:Ø25×D35CM (Ø9.84×D13.78inch)
Inside capacity：18 Liter
Material：Stainless steel #304
Outside Size(L*W*H) ：56*39*36 CM
Packing Size(L*W*H) ：64*46*41 CM
G.W:25.5KGS
Sterilizer temperature/pressure：121℃/0.12Mpa; 134℃/0.22Mpa
Sterilize time：25Min/6Min
Power：1000W
AC110V/8A
Auto supply water system: Manual give the water
SAFETY : Heating-over protection ; safety valve
Safety equipment:
1.Pressure adjustment: adjust the inter pressure, if over standard value
automatic vent
2. Avoild overheat protect device: when inter temperature overheat, power break electric current automatically.
Temp and Press display :Led several windows
Disinfection principle：Uses the vapor power emissions cold air / 2 times
Caution：
1.After the completion of disinfection,please to wait for 10 minutes.
Pressure Gauge in red area. Do not rotate handle, open the steam discharge valve firstly.
2.Before each use,must supply water 800ml of distilled water .
3.Please close steam discharge valve before the disinfection.
4.Do not use any corrosive or chemical water as the disinfection.
5.Do not share the same electricoutllet with other electrical apparetus.
6.Please pay attention to correct voltage and frequency.
7.Connect steam exhaust pipe with the steam vent，before operation.
Packing:
main unit 1pc
Standard accessories:
Plate 3pcs
Shelf 1pc
Take Plate tool 1pc
steam exhaust pipe 1pc
////////////////////////////////////////////////////////////////////////////
Dental Aluminum Oxide Micro Blaster Four-Hole Interface Microetcher Sandblasting Alumina System Dental Instrument
Description:
Alumina sandblasting gun
Alumina sandblast guns have proven to be the most valuable tools in the dental field thanks to their effective,
powerful effects and extensive application methods.
Alumina sandblasting guns provide precise surface micro-grain treatment that can increase adhesion up to 400%.
The surface that has just been etched is more active, so it can increase the chemical adhesion and optimize the bonding effect.
It can be applied to all metal materials, composite materials and ceramic materials.
- High-temperature and high-strength engineering material sand tanks to ensure a firm grip structure;
- high sensitive touch switch, start and stop by the heart;
- Convenience and gas connection;
- Product use for : to increase the viscosity of the tactile surface, roughening
- The surface of the metal composite material, tungsten Steel, fiber post, inlay surface.
- Without water.
General abrasive uses：
Aluminum Oxide, 90 micron, tan Rapid removal of cements from metals.Preparation of metals for bonding.
Aluminum Oxide, 50 micron, white General bonding preparation of metallic and nonmetallic surfaces.(Will not discolor porcelain or composites).
Microprophy B, white Stain removal.Pit and fissure preparation.Sodium Bicarbonate,Flavored.
SA-85 Remove resin paste without enamel erosion.
Glass Beads, 90 micron, white Satin luster texturing metal surfaces to reduce brightness. Clean dentures. Not for bonding or intraoral use.
Package Included:
1 x handpiece connector (1.8m flexible tube/ joint)
1 x nozzle
1 x sand tank
1 x user manual
