📌 Product Overview
The NextShapes PLA Basic refill is a 1KG roll of standard
1.75mm PLA filament supplied without a disposable spool.
The refill format is designed to reduce spool waste, save storage
space and work with compatible reusable spool systems.
♻️ Refill Format – Less Spool Waste
Manufacturer information describes this as a
spool-free refill filament intended for compatible reusable
spool holders.
This can reduce disposable spool waste and make filament storage
more compact.
🎯 1.75mm Diameter
1.75mm
Standard 1.75mm filament diameter for compatible FDM 3D printers.
📐 ±0.02mm Dimensional Accuracy*
±0.02mm*
Manufacturer information states that filament diameter is controlled
to 1.75mm with a tolerance of approximately ±0.02mm.
🖨️ Designed for Reliable PLA Printing
Manufacturer information describes the PLA as having
low warping and low shrinkage, helping support consistent
print results on suitable printers and settings.
🧱 Toughness & Strength
Manufacturer information describes printed models as having useful
toughness and strength, with resistance to cracking under normal use.
🌡️ Recommended Printing Temperatures*
NOZZLE: 190–230°C
BED: 50–65°C
Manufacturer information recommends approximately
190–230°C nozzle temperature and
50–65°C bed temperature, with around 60°C suggested
for the bed as a starting point.
💨 Pre-Dried & Vacuum Sealed*
Manufacturer information states that the filament undergoes
approximately 24 hours of drying before packaging and is
vacuum sealed to help reduce moisture before use.
💧 Clog & Bubble Reduction
Manufacturer information describes the controlled filament diameter,
drying process and sealed packaging as helping to reduce clogging,
bubbles and moisture-related printing issues.
🧵 Neatly Wound / Reduced Tangle Design
Manufacturer information states that mechanical winding and manual
inspection are used to help keep the filament neatly wound and
reduce tangling during printing.
☀️ Printing Note – Drying Recommended
Manufacturer information recommends drying the filament before use,
especially if the packaging has been opened or the filament has been
exposed to a humid environment.
🖨️ Printer & Spool Compatibility
Manufacturer information describes compatibility with most suitable
FDM 3D printers using 1.75mm PLA filament.
The refill is also described as compatible with suitable
Bambu Lab spool holders and compatible NextShapes reusable
spool systems.
📌 Important Buyer Notes
- Condition: New.
- Brand: NextShapes.
- Material: PLA.
- Colour: Dark Gray.
- Net Weight: 1KG / 2.2lb.
- Diameter: 1.75mm.
- This is refill filament – no spool included.
- ±0.02mm tolerance is manufacturer-stated.
- Recommended nozzle temperature: 190–230°C.
- Recommended bed temperature: 50–65°C.
- Approx. 60°C bed temperature suggested by manufacturer.
- Low warping / shrinkage claims are manufacturer-stated.
- Vacuum sealing / pre-drying claims are manufacturer-stated.
- Drying before printing is recommended.
- Please confirm your reusable spool / holder compatibility before purchase.