Overview

Give tired cabinets, shelves and furniture a fresh, natural wood look with this pre-glued real wood veneer edge banding. The iron-on adhesive backing bonds quickly to raw MDF, plywood, particle board and melamine edges, covering chipped or exposed cores with a smooth, authentic wood grain finish.

Supplied in a long continuous roll, it lets you wrap straight runs and long edges with fewer seams and less waste than short strips. Simply trim to length, press with a household iron and trim the overhang for a clean, professional result that stains and finishes just like solid wood.

Key Features

• Material : Real wood veneer and melamine options including pine, beech, birch, maple, cherry, walnut and red oak
• Adhesive : Pre-applied hot melt glue activated by a standard household iron
• Roll Length : 15 m (50 ft) continuous roll
• Width Options : 19 mm (3/4 in) and 50 mm (2 in) available
• Thickness : Approx. 0.5 mm (1/64 in) for a low-profile, flush finish
• Shape : Rectangular strip, ready to cut to size
• Finish : Untreated, accepts stain, varnish, paint and edge wax
• Customization : Trimmable to any length with scissors or a utility knife

Highlights

• ✓ Restores chipped or worn cabinet and shelf edges in minutes with no clamps or messy glue
• ✓ Real wood surface blends naturally with existing furniture and accepts matching stain
• ✓ Long 15 m roll covers multiple doors, drawers and panels from a single purchase
• ✓ Works on curved and straight edges thanks to the flexible thin veneer
• ✓ Ideal for upcycling, carpentry repairs and weekend DIY makeovers

Usage

Perfect for repairing or enhancing kitchen cabinets, wardrobes, shelving, tables, chairs, picture frames, countertops and craft projects. It is a practical choice for carpenters, furniture restorers, hobbyists and anyone refreshing flat-pack or melamine furniture at home.

Apply by heating the adhesive side with an iron, pressing the strip firmly onto the clean edge, then trimming and sanding the overhang. Finish with stain or varnish to match your project.

In the Box

• 1 x Pre-glued wood veneer edge banding roll (length and width depend on the selected option)

Please Note

• Cut edges and wood splinters may be sharp — handle with care and wear gloves when trimming.
• Adhesive requires a heated iron to activate; follow the recommended temperature for your veneer type.