JIC Female x JIC Male 90° Compact

Ayrtec | Part number range JIF-JIM-90C | Select your size from the dropdown

A JIC-to-JIC 90° that adds a hard bend to an existing assembly without re-making the hose. The swivel female takes the hose end, the male goes into the port, and nothing gets wound up lining it up.

Brand: Ayrtec - mild steel body with a plated finish, manufactured to the standards listed below.

Thread Standards

• JIC 37° Swivel Female - SAE J514 37° flare. It seals on the 37° cone seat and swivels, so the hose is never wound up during assembly.
• JIC 37° Male - SAE J514 37° flare. It seals metal-to-metal on the 37° cone, so it takes no tape at all.

How to Choose

• Both ends are 37° cone. Sizes do not have to match, and a female 12 to male 08 is a common way to step down at the port.
• JIC 37° and SAE 45° flare look similar and share thread sizes. The wrong cone angle seals briefly then weeps.
• Never tape a JIC thread. It seals on the cone and tape only holds the cone off its seat.

Technicians Advice

Bring the swivel nut up until the cones meet, then a defined amount further - about a sixth of a turn on small sizes, a quarter on large. Chasing a JIC weep with more torque flattens the cone and turns a reusable joint into scrap.

Where You’ll Find It

• JIC 37° Swivel Female - Hose ends on imported machinery, where the swivel lets the assembly be fitted without winding up the hose.
• JIC 37° Male - Hose ends and ports on imported US and Asian machinery - Caterpillar, John Deere, Case IH, New Holland, Bobcat, Kubota, Takeuchi.

Cross-Reference

• JIC 37° Swivel Female - SAE J514 / ISO 8434-2 37° flare. Parker series Triple-Lok.
• JIC 37° Male - SAE J514 / ISO 8434-2 37° flare. Parker call this series Triple-Lok. The industrial cousin of the AN 37° flare used in aviation and motorsport.

Parker, Gates, Aeroquip and Ryco all manufacture to these same standards under their own part numbering, so a fitting built to the standard above will mate with theirs.

Cross-references are given at series level as a guide to the standard, not as a part-for-part substitution. Always confirm the thread form, size and seal type against the port before ordering.

What you receive

One Ayrtec fitting in the size selected from the dropdown. Each size is its own part number, quoted in the dimension table. Images are representative of the range.

Postage

Dispatched from Queensland. Orders placed before 2pm on a business day are packed the same day. Tracking is provided on every parcel.

Returns

Unused items in original condition can be returned within 30 days for change of mind. Buyer pays return postage and a 20% restocking fee applies. Start the return through eBay so it is tracked against your order.

Questions

Not sure which thread or size you need? Send a message through eBay with the fitting you are matching to and we will confirm the right part before you buy.