Hose Tail - JIC Swivel Female - 45° Elbow - Two-Piece Crimp-On

Ayrtec | Part number range HTB-JIF-45S | Select your size from the dropdown

A JIC swivel female on a 45° swept crimp tail. Takes the hose away at 45° where a straight tail would kink it against the machine.

Mild steel body with a plated finish, manufactured to the standard listed above.

This is the tail only - ferrules are sold separately

A two-piece crimp-on assembly is two separate parts: this tail (the stem) and a ferrule that crimps over the hose. The ferrule is not included. You need one ferrule per tail.

We sell them separately on purpose. Several different ferrule styles will fit, and the right one depends on the hose you are crimping onto, not just the size:

• FS‑R2 Multi‑Fit - 1‑wire, 2‑wire, M3K and MXT braided hose. One series covers the lot, so most jobs take this.
• FS‑R7 - thermoplastic 100R7 hose. Different outside diameter and crimp figure to braided hose.
• FS‑R14 - PTFE 100R14 hose with stainless braid.

Thread Standards

• JIC 37° Swivel Female - SAE J514 37° flare, seals on the 37° cone seat and swivels, so the hose is never wound up during assembly

How to Choose

• The bend is formed into the tail, so the angle is fixed. Decide which way the hose has to leave the port before you order - you cannot rotate it after it is crimped.
• A 45° often solves a routing problem a 90° over-corrects. Try it before you jump to a full right angle.
• Seals dry on the 37° cone.

Technicians Advice

Offer the hose up before you commit to the bend. A 45° that points the wrong way is worse than a straight, because the hose then fights the fitting for the life of the assembly.

Where You’ll Find It

• JIC 37° Swivel Female - Hose ends on imported machinery, where the swivel lets the assembly be fitted without winding up the hose.

Cross-Reference

• JIC 37° Swivel Female - SAE J514 / ISO 8434-2 37° flare. Parker series Triple-Lok.

Parker, Gates, Aeroquip and Ryco all manufacture to these same standards under their own part numbering, so a fitting built to the standard above will mate with theirs.

Cross-references are given at series level as a guide to the standard, not as a part-for-part substitution. Always confirm the thread form, size and seal type against the port before ordering.

What you receive

One Ayrtec fitting in the size selected from the dropdown. Each size is its own part number, quoted in the dimension table. Images are representative of the range.

Postage

Dispatched from Queensland. Orders placed before 2pm on a business day are packed the same day. Tracking is provided on every parcel.

Returns

Unused items in original condition can be returned within 30 days for change of mind. Buyer pays return postage and a 20% restocking fee applies. Start the return through eBay so it is tracked against your order.

Questions

Not sure which thread or size you need? Send a message through eBay with the fitting you are matching to and we will confirm the right part before you buy.