Product Description
Sliding Door Roller Assembly, Steel Ball Bearings, 1-1/4 In. - D 1686
This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 9/16 in. wide with a flare width of 11/16 in., 1-1/8 in. tall and 1-1/4 in. long (not including the inner roller housing). It has a rear adjusting screw. Used by a variety of patio door manufacturers.
- Used by a variety of metal sliding patio door manufacturers
- As the corner screw passes through the F-tab it is captured by the side stile and bottom rail as the screw draws the two sides together
- 1-1/4 in. diameter ball bearing concave roller
- Stamped steel housing and roller
- F-tab housing
- Rear adjusting screw
- A Phillips head screwdriver is required for installation
- For further dimensional information, please see the line drawing
