Zooz 800 Series Z-Wave Long Range Heavy Duty Wall Switch ZEN75 800LR

KEY FEATURES Easily control your lights, fans, receptacles, and motors via a wall switch or wirelessly with Z-Wave technology Great for large LED installations (up to 600 Watts) and fans (no speed control) Works as a controller (not a disconnector as one leg remains hot when off) for 240 V and 277 V commercial applications such as well pumps, HVAC equipment, motors, ballast lighting, and more. If complete power disconnection is required for servicing, an external disconnect switch should be installed. Learn more about supported loads here This switch delivers instant on/off control (for dimming, check out Z-Wave dimmer) 800 Series Z-Wave Chip: faster signal transmission, extended range, SmartStart inclusion, and S2 security for a seamless smart home experience Z-Wave Long Range ready: Expand wireless coverage up to 1300 feet with a compatible hub Direct 3-Way Solution: no add-on switch required! Works like the ZEN71 model (neutral wire needed, 4-Way wiring possible if direct connection to load and line are in the same box, check before buying) It's perfect for simple single pole installations too! Use with a standard-size decora wall plate (not included) Adjustable LED indicator: customize color and brightness that works for you Built-in range test tool: quickly diagnose network connectivity issues directly from the switch Scene control support: activate smart home routines via multi-tap triggers* Smart bulb mode: disable the relay for wireless smart lighting control or use it as a remote add-on switch Power Failure Recovery: restores last on/off status automatically Compatible with LED and incandescent bulbs (NOTE: FEIT bulbs are not recommended) Control well pumps and pool pumps up to 1HP at 120 V (or up to 3 HP at 240 V) Suitable for tube lights with ballast, shop lights, and halogen bulbs (up to 350 W) Stronger Signal Repeater: improves your Z-Wave mesh network performance. SPECIFICATIONS Z-Wave Region: US/MX/CA Power: 120-277V AC, 50/60 Hz Maximum Loads (read more about supported loads here): 600W LED 1800W Incandescent 15 A Resistive / Tungsten / Incandescent 10 A Inductive Ballast / Electronic Ballast / LED 1 HP at 120 VAC Motor / 3 HP at 240 VAC Motor Z-Wave Range: Up to 200 feet line of sight between the hub and the closest Z-Wave receiver module, up to 1300 feet with Z-Wave Long Range enabled (your Z-Wave hub needs to support that feature) Dimensions: 1.3" deep, 1.75" wide, 4.1" tall Operating Temperature: 32-104° F (0-40° C) Installation: Indoor use only WORKS WITH Z-Box Hub (recommended for Zooz products) 2GIG (no advanced settings or scene control) ADT Pulse (no advanced settings or scene control) Home Assistant (Z-Wave JS) HomeSeer (with Z-Wave Plus plug-in) Homey (Zooz App for Homey) Hubitat Indigo (NOTE: no security, Indigo does not support S2 Z-Wave security) ISY Ring (no advanced settings or scene control) SmartThings Hub (custom lua driver for advanced functionality coming soon) INSTALLATION Before installing, make sure the load does not exceed 1800W for incandescent lights, 600W for LED's, or 15A for resistive load (read more about supported loads here). Check your wiring first to confirm that you have all the following wires present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician. Here are some helpful wiring tips: Make sure the gang box you are about to install the switch has a neutral wire available - you will not be able to get the ZEN75 switch to work without a neutral wire. Unlike regular mechanical switches, Z-Wave switches require all of the wires to be connected exactly as indicated - line and load wires can never be swapped as it sometimes happens to the most experienced electricians. How to include the Zooz Heavy Duty switch to your smart home network?1. Bring your Z-Wave gateway hub or controller as close to the switch as possible2. Put your Z-Wave controller in inclusion/pairing mode3. Scan the SmartStart QR code on the front metal plate of the switch or tap the upper paddle of the switch 3 times quickly to finalize the inclusion process manually4. A new on/off switch should appear on your controller's device list NOTE: Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 or 3 switches.

Zooz 800 Series Z-Wave Long Range Heavy Duty Wall Switch ZEN75 800LR

KEY FEATURES

Easily control your lights, fans, receptacles, and motors via a wall switch or wirelessly with Z-Wave technology
Great for large LED installations (up to 600 Watts) and fans (no speed control)
Works as a controller (not a disconnector as one leg remains hot when off) for 240 V and 277 V commercial applications such as well pumps, HVAC equipment, motors, ballast lighting, and more. If complete power disconnection is required for servicing, an external disconnect switch should be installed.
Learn more about supported loads here
This switch delivers instant on/off control (for dimming, check out Z-Wave dimmer)
800 Series Z-Wave Chip: faster signal transmission, extended range, SmartStart inclusion, and S2 security for a seamless smart home experience
Z-Wave Long Range ready: Expand wireless coverage up to 1300 feet with a compatible hub
Direct 3-Way Solution: no add-on switch required! Works like the ZEN71 model (neutral wire needed, 4-Way wiring possible if direct connection to load and line are in the same box, check before buying)
It's perfect for simple single pole installations too!
Use with a standard-size decora wall plate (not included)
Adjustable LED indicator: customize color and brightness that works for you
Built-in range test tool: quickly diagnose network connectivity issues directly from the switch
Scene control support: activate smart home routines via multi-tap triggers*
Smart bulb mode: disable the relay for wireless smart lighting control or use it as a remote add-on switch
Power Failure Recovery: restores last on/off status automatically
Compatible with LED and incandescent bulbs (NOTE: FEIT bulbs are not recommended)
Control well pumps and pool pumps up to 1HP at 120 V (or up to 3 HP at 240 V)
Suitable for tube lights with ballast, shop lights, and halogen bulbs (up to 350 W)
Stronger Signal Repeater: improves your Z-Wave mesh network performance.

SPECIFICATIONS

Z-Wave Region: US/MX/CA
Power: 120-277V AC, 50/60 Hz
Maximum Loads (read more about supported loads here):
- 600W LED
- 1800W Incandescent
- 15 A Resistive / Tungsten / Incandescent
- 10 A Inductive Ballast / Electronic Ballast / LED
- 1 HP at 120 VAC Motor / 3 HP at 240 VAC Motor
Z-Wave Range: Up to 200 feet line of sight between the hub and the closest Z-Wave receiver module, up to 1300 feet with Z-Wave Long Range enabled (your Z-Wave hub needs to support that feature)
Dimensions: 1.3" deep, 1.75" wide, 4.1" tall
Operating Temperature: 32-104° F (0-40° C)
Installation: Indoor use only

WORKS WITH

Z-Box Hub (recommended for Zooz products)
2GIG (no advanced settings or scene control)
ADT Pulse (no advanced settings or scene control)
Home Assistant (Z-Wave JS)
HomeSeer (with Z-Wave Plus plug-in)
Homey (Zooz App for Homey)
Hubitat
Indigo (NOTE: no security, Indigo does not support S2 Z-Wave security)
ISY
Ring (no advanced settings or scene control)
SmartThings Hub (custom lua driver for advanced functionality coming soon)

INSTALLATION

Before installing, make sure the load does not exceed 1800W for incandescent lights, 600W for LED's, or 15A for resistive load (read more about supported loads here).

Check your wiring first to confirm that you have all the following wires present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).

If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.

Here are some helpful wiring tips:

Make sure the gang box you are about to install the switch has a neutral wire available - you will not be able to get the ZEN75 switch to work without a neutral wire.
Unlike regular mechanical switches, Z-Wave switches require all of the wires to be connected exactly as indicated - line and load wires can never be swapped as it sometimes happens to the most experienced electricians.

How to include the Zooz Heavy Duty switch to your smart home network?
1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
2. Put your Z-Wave controller in inclusion/pairing mode
3. Scan the SmartStart QR code on the front metal plate of the switch or tap the upper paddle of the switch 3 times quickly to finalize the inclusion process manually
4. A new on/off switch should appear on your controller's device list

NOTE: Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 or 3 switches.