1x Dental LED Curing Light Wireless Cure Lampe Starke und langlebige Lichtspitze
1x Dental LED Curing Light Wireless Cure Lampe Starke und langlebige Lichtspitze
Dental LED Polymerisationslampe für die Lichthärtung
Features:
Struktur und Komponenten:
Lichtleiter, kreisförmige Augenschutz;
Netzteil; Ladestation;
Handstück, LCD-Panel;
Einstellungstasten; Ladeanzeige.
Prinzip: LED Curing Light wird nach dem Prinzip der Strahlenbestrahlung angewendet, um das lichtempfindliche Harz zu verfestigen, indem es in kurzer Zeit darauf geschossen wird.
Verwendungszweck: Für die Polymerisation von lichthärtenden Materialien durch Zahnärzte.
Einstellbare Aushärtezeit und drei Aushärtearten sind verfügbar.
Spezifikationen:
Netzteil - Lithium-Ionen-Akku
- Eingang: AC 100 ~ 240V, 50 / 60Hz
- Spannung: DC 3.7V - Ausgang: DC 4.2V
- Kapazität: 2200mAh
- Ladezeit: Etwa 5 Stunden
LED
- Außendurchmesser: Ø8mm
- Fläche: 50mm2
- Wellenlänge: 450 ~ 470nm
- Beleuchtung: 1200-1500mW / cm2
Drei Härtungsmodus:
P1: FAST Mode - immer volle Leistung
P2: RAMP-Modus - allmählich zunehmende Leistung, dann volle Leistung bis zum Ende
P3: PULSE Mode-1 zweites Intervall mit voller Leistung für 1,8 Sekunden
Abmessungen
Haupteinheit (Steuerungsteil): 26 * 40 * 145mm
Ladestation: 60 * 100 * 70mm
Nettogewicht: ca. 320 g
Arbeitsumfeld
Umgebungstemperatur: 5 ℃ ~ + 40 ℃
Relative Luftfeuchtigkeit: 0% ~ 80%
Atmosphärischer Druck: 70KPa ~ 106KPa
Anmerkungen:
Bitte erlauben 1-3 cm abweichung aufgrund der manuellen messung.
Bitte haben Sie Verständnis dafür, dass sich die Bilder leicht vom tatsächlichen Artikel unterscheiden, da jeder Monitor nicht gleich kalibriert ist.
Paket enthalten: 1pc Cure Lampe
English description:
Dental LED Curing Light Wireless Cure Lamp
Features:
Structure and Components:
Light guide;Circular eye-protector;
Power adapter;Charging base;
Hand piece;LCD Panel;
Setting Buttons;Charging Indicator.
Principle:LED
Curing Light is applied to ray radiation principle to solidify the
light-sensitive resin by shooting at it in a short time.
Intended use:Used for polymerization of light cured materials by dental professionals.
Adjustable curing time and three curing modes are available.
Specifications:
Power Adapter - Li-ion Battery
- Input: AC 100~240V, 50/60Hz
- Voltage: DC 3.7V - Output: DC 4.2V
- Capacity: 2200mAh
- Charging Time: About 5 hours
LED
- Outer Diameter: Ø8mm
- Area: 50mm2
- Wavelength: 450~470nm
- Illumination:1200-1500mw/cm2
Three Curing Mode:
P1:FAST Mode–full power all the time
P2: RAMP Mode–gradually increasing power then full power till ends
P3:PULSE Mode–1 second interval with full power for 1.8 second
Dimension
Main Unit (Control Part): 26*40*145mm
Charging Base: 60*100*70mm
Net weight: About 320 g
Working Environment
Ambient temperature: 5℃ ~ +40℃
Relative humidity range: 0% ~ 80%
Atmospheric pressure: 70KPa ~ 106KPa
Notes:
Please allow 1-3cm deviation due to manual measurement.
Please
understand that the pictures might be slightly different from the
actual item because every monitor is not calibrated same.
Package Included:1pc Cure Lamp
