Specification Color: Black, Clear Material: PU, Iron Plate, Copper, Aluminum, Magnets Model: KD-100 Phase: 1 Mounting Type: Freestanding Power Source: Corded Electric Plug Standard: US Standard Timing: 10-60min Speed: 4 Gears (2000rpm, 2500rpm, 3000rpm, 3500rpm) Capacity: 800g/1.76lbs Voltage: 110V Power: 0.2KW Polishing Bucket Diameter: 12.7cm/5in Product Size(L*H): 17.78*27.94cm/7*11in Package Included 1* Magnetic Polishing Machine 2* Fuses 1 Bag* Burnishing Pins 1* Polishing Bucket
Application
It is suitable for cubic zirconia (CZ), ruby, sapphire, diamond, gold, silver, copper, aluminum, zinc, magnesium, iron, stainless steel, hard plastic, non-metallic materials, etc. It can be used for polishing, rust removal, removing black spots, fine grinding, rough machining, chamfering, edge trimming, etc.
How to Use
1. Pour 1/4 of the water into a bucket and mix 0.22 lbs of burnishing pins with 0.22-0.44 lbs of jewelry(not included). Then add about 0.02 lbs of polishing solution(not included).
2. Press the lower green button to the “o” position for bi-directional rotation and to the “I” position for uni-directional rotation. It rotates in one direction for about 3 minutes, then automatically rotates in the opposite direction for 3 minutes. (It is recommended to rotate in both directions.) You can choose a specific time by turning the time control button.
Notes
- After polishing, there will inevitably be some polishing marks left, which need to be manually polished again to remove the marks and achieve a mirror effect!
- It has self-protection function. When it works for a long time, it will stop to rest. After the motor cools down, it will continue to work.
- Please note that it cannot polish flat surfaces.
- Please do not fill the polishing bucket with any corrosive liquid.
- Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
